Poulan 3450, 3750 Cutting a Fallen Tree, Types of Cutting Used for Bucking, Sion side

Page 12

CUTTING A FALLEN TREE

(BUCKING)

Bucking is the term used for cutting a fallen tree to the desired log length.

WARNING: Do not stand on the log being cut. Any portion can roll causing loss of footing and control. Do not stand downhill of the log being cut.

IMPORTANT POINTS

SCut only one log at a time.

SCut shattered wood very carefully; sharp pieces of wood could be flung toward oper- ator.

SUse a sawhorse to cut small logs. Never allow another person to hold the log while cutting and never hold the log with your leg

or foot.

S Do not cut in an area where logs, limbs, and roots are tangled. Drag the logs into a clear area before cutting by pulling out ex- posed and cleared logs first.

TYPES OF CUTTING USED FOR BUCKING

WARNING: If saw becomes pinched or hung in a log, don’t try to force it out. You can lose control of the saw resulting in injury and/or damage to the saw. Stop the saw, drive a wedge of plastic or wood into the cut until the saw can be removed easily. Restart the saw and carefully reenter the cut. Do not attempt to restart your saw when it is pinched or hung in a log.

Use a wedge to remove pinched saw

Turn saw OFF and use a plastic or wooden wedge to force cut open.

WARNING: Never turn saw upside down to undercut. The saw cannot be con- trolled in this position.

Always make your first cut on the compres- sion side of the log. The compression side of the log is where the pressure of the log’s weight is concentrated.

First cut on compression side of log

Second cut

Second cut

First cut on compression side of log

BUCKING WITHOUT A SUPPORT

SOvercut through 1/3 of the diameter of log. S Roll log over; finish with a second overcut. S Watch for saws with a compression side to prevent the saw from pinching. See il- lustrations for cutting logs with a compres-

sion side.

BUCKING USING A LOG OR SUP- PORT STAND

SRemember your first cut is always on the compression side of the log (refer to the il- lustrations below for your first and second cuts).

S Your first cut should extend 1/3 of the diameter of the log.

SFinish with your second cut.

Using a log for support 2nd Cut

Overcutting begins on the top side of the log with the saw against the log. When overcut- ting use light downward pressure.

Overcutting Undercutting

1st Cut

2nd Cut

1st Cut

Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you.

Using a support stand 2nd Cut

1st Cut

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Operate Your SAW Safely Maintain Your SAW in Good Working OrderHandle Fuel with Caution KickbackKickback Safety Features Reduce the Chance KickbackMaintain Control Avoid Obstructions Clear The Working AreaSafety Notice Exposure to Chain BrakeComputed kickback angle CKA Table Symmetrical Guide Bar Large Radius TipAttaching the BAR & Chain If not Adjusting the tension Checking the tensionFit chain drive links into bar groove Are in the bar grooveON/STOP Switch Know Your SAWThrottle Trigger Throttle LOCK-OUTFueling Engine BAR and Chain LubricationImportant Points to Remember Right foot through rear handleStarting a Warm Engine Difficult Starting or starting a flooded engineBraking function control Caution The chain brake must be Inertia activating function controlTree Felling Techniques Felling Large TreesBucking Using a LOG or SUP- Port Stand Cutting a Fallen TreeTypes of Cutting Used for Bucking Bucking Without a SupportLimbing and Pruning Important Points LimbingPruning AIR FilterCleaning the Spark ARREST- ING Screen Carburetor AdjustmentsBAR Maintenance Inspect Muffler and Spark Arresting ScreenNeed a Service PART? Need ASSISTANCE?Trouble Cause Remedy Your Warranty Rights and OB Ligations The U. S. Environmental

3450, 3750 specifications

The Poulan 3450 and 3750 chainsaws are notable models in the Poulan lineup, designed for both homeowner and light professional use. These chainsaws are recognized for their reliability, ease of use, and efficient performance in cutting tasks, making them a popular choice among users.

One of the defining features of the Poulan 3450 is its lightweight design, weighing in at approximately 10 pounds. This makes it easy to handle for extended periods without causing significant fatigue. The 3450 is equipped with a 16-inch bar, suitable for small to medium-sized cutting jobs, whether pruning trees or cutting firewood. It is powered by a 34 cc engine that provides adequate power for these tasks while maintaining a balance between performance and fuel efficiency.

The Poulan 3750 model offers a bit more power with its 37 cc engine. This model also features a 16-inch bar, but the additional engine capacity allows for better performance in more demanding cutting conditions. The 3750’s enhanced power makes it an excellent choice for users who require a bit more muscle for larger jobs, while still being manageable for the average homeowner.

Both models incorporate Poulan's patented Easy Start technology, which significantly reduces the effort needed to start the engine. This technology is particularly beneficial for less experienced users, as it requires less pull force compared to traditional chainsaw designs.

Another significant feature of the Poulan chainsaws is their automatic chain oiler that ensures the chain remains lubricated during operation. This helps to prolong the life of the chain and bar, reducing wear and enhancing cutting efficiency. The adjustable oiler also allows users to customize the oil flow based on their cutting applications.

In terms of safety, the Poulan 3450 and 3750 come equipped with a chain brake system that quickly stops the chain in the event of kickback, providing an additional layer of protection for the operator.

With their combination of power, portability, and ease of use, the Poulan 3450 and 3750 chainsaws present an excellent value for homeowners looking for reliable and efficient tools for their outdoor tasks. These models highlight Poulan's commitment to innovation and user-friendly designs, making them a smart choice for anyone needing a dependable chainsaw.
Top Page Image Contents