Poulan 2750, 2775, 2900, 3050 manual Chain Tension Including units with chain already installed

Page 6

Mount the Bar

Tip of Bar

Proper chain direction

Chain moves freely

Lifts only 1/8 of an inch from bar.

Bar clamp nuts

Place chain onto the sprocket

Adjusting screw

 

CHAIN TENSION (Including units with chain already installed)

NOTE: When making adjustments to the chain tension make sure the bar nuts are finger tight only. Attempting to tension the chain when the bar nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the assembly tool to move the chain around the bar. If the chain does not rotate, it is too tight. If the chain is too loose, it will sag below the bar.

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw.

You can adjust the chain tension by loosen- ing the bar clamp nuts finger tight and turning the adjusting screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting

screw 1/4 turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

SLift up the tip of the bar and tighten the bar clamp nuts with the combination screw- driver/wrench.

SRecheck chain tension.

FUELING ENGINE

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality

2-cycle air-cooled engine oil. We recommend Poulan or Poulan ProR brand oil. If you do not use this oil, use a good quality 2-cycle air-cooled oil designed to be mixed at a ratio of 40:1 (A 40:1 ratio is obtained by mixing 3.2 onces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules relating to fuel before fueling your unit.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

In freezing weather oil will thicken, making it necessary to thin bar and chain oil with a small amount (5 to 10%) of #1 Diesel Fuel or kerosene. Bar and chain oil must be free flowing for the oil system to pump enough oil for adequate lubrication.

Genuine Poulan or Poulan Pro bar and chain oil is recommended to protect your unit against excessive wear from heat and

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s Manual Manual del Operador Maintain Your SAW in Good Working Order Plan AheadOperate Your SAW Safely Handle Fuel with CautionKickback Reduce the Chance KickbackFuel cap and refuel unit B175.1 Kickback Safety FeaturesMaintain Control Handed. Keep your left arm straight with the elbow lockedAttaching the BAR & Chain If Not already attachedChecking the tension Chain Tension Including units with chain already installedAdjusting the tension Fueling EngineDifficult Starting or starting a flooded engine Important points to rememberStarting a Warm Engine Important PointsInches in diameter or larger Tree Felling TechniquesFelling Large Trees Notch CUT and Felling the TreeTypes of Cutting Used for Bucking Bucking Using a LOG or SUP- Port StandCutting a Fallen Tree Bucking Bucking Without a SupportLimbing Removing a Pinched SAWLimbing and Pruning Important Points PruningBAR Maintenance Maintenance ScheduleCarburetor Adjustments AIR FilterCall Contact your retailerYour Warranty Rights and Obliga Tions The U. S. Environmental Protection

2750, 2775, 2900, 3050 specifications

The Poulan series of chainsaws, including models 2750, 2775, 2900, and 3050, epitomizes reliability and performance in outdoor power equipment. Each of these models has been designed to cater to a variety of users, from homeowners to professional landscapers, thanks to their robust features and innovative technologies.

The Poulan 2750 is a lightweight, user-friendly chainsaw that boasts a 2.5 horsepower engine. This model is perfect for light cutting tasks like pruning and trimming. It features an easy-start system, which reduces the jerking on startup, making it more accessible for novice users. Additionally, the automatic oiling system ensures the chain remains lubricated, enhancing performance and longevity during use.

The Poulan 2775 builds upon the functionalities of the 2750 with an improved engine capacity of 2.7 horsepower. This chainsaw is tailored for more demanding tasks such as felling trees and cutting larger branches. The 2775 is equipped with a 20-inch bar, providing a larger cutting capacity. Its heavy-duty construction ensures durability while still maintaining a manageable weight for ease of handling.

Moving up the line, the Poulan 2900 features a powerful 3.0 horsepower engine, making it an excellent choice for professional-grade tasks. The model includes an advanced air filtration system, which is designed to keep the engine clean for extended usage. This technology not only enhances performance but also increases the lifespan of the chainsaw. The 2900 also has an anti-vibration system, significantly reducing user fatigue during long periods of operation.

Finally, the Poulan 3050 encompasses all the best features of its predecessors, packed in an even more powerful package. The 3050 is noted for its 3.5 horsepower engine, making it suitable for heavy-duty applications. It features a robust design, incorporating a 20-inch cutting bar, which facilitates efficient cutting of large logs and trees. This model is equipped with an easy-access air filter and a transparent fuel tank that allows users to monitor fuel levels without needing to open the tank.

In summary, the Poulan 2750, 2775, 2900, and 3050 chainsaws are tailored to meet varying user needs while maintaining performance and reliability. Each model incorporates essential features and technologies that enhance usability, making them ideal choices for a wide range of cutting tasks. From homeowners tackling yard work to professionals handling extensive landscaping projects, these chainsaws deliver exceptional performance and user-friendly operation.
Top Page Image Contents