Poulan 545117550 instruction manual Service and Adjustments

Page 15

SERVICE AND ADJUSTMENTS

WARNING: Disconnect unit from power source before performing service or making adjustments.

CHAIN SHARPENING

Chain sharpening is a complicated task that requires special tools. We recommended you refer chain sharpening to a professional chain sharpener.

CHAIN REPLACEMENT

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

It is normal for a new chain to stretch during the first 15 minutes of operation. You should re- check your chain tension frequently and adjust the chain tension as required. See CHAIN TEN- SION section.

Replace the old chain when it becomes worn or damaged. Use only the Low-Kickback replace- ment chain specified in the repair parts list.

TO REPLACE CHAIN:

1.Disconnect pruner from power source.

2.Remove bar clamp nut.

3.Remove bar clamp.

4.Turn adjusting screw by hand counter- clockwise until adjusting pin just touches the stop.

5.Slide guide bar behind sprocket until guide bar stops against sprocket.

6.Remove the old chain.

7.Carefully remove new chain from pack- age. Hold chain with the drive links as shown.

Cutter

Tip of

Bar

Drivelink

Cutters

Depth Gauge

 

 

Drive Links

8.Place chain over sprocket, fitting the drive links in the sprocket.

9.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

10.Fit chain drive links into bar groove.

11.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

12.Now, install bar clamp making sure the adjusting pin is positioned in the lower hole in the guide bar.

Lower

Hole

Adjusting Pin

Guide Bar

CUTTERS MUST FACE IN

DIRECTION OF ROTATION

USER REPLACEABLE SERVICE PARTS

13.Install bar clamp nut and finger tighten only. Do not tighten any further at this point. Proceed to the CHAIN ADJUST- MENT section.

CHAIN ADJUSTMENT

See CHECK CHAIN TENSION in MAINTE- NANCE section.

REPLACEMENT PART

PART NUMBER

Assist Handle

530057546

Bolt Carriage, 1/4-20

530015786

Wing Nut

530016152

Bar

530044908

Chain

952051549

Hex Nut

530015917

Oil Cap

530053072

Bar Adjusting Screw/Pin Kit

530069110

Handlebar Accessory Kit

530071864

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Manual de Instrucciones Manuel d’Instructions Plan Ahead Identification of SymbolsSafety Rules Is necessary when used near childrenBefore operating this unit Tension cord receptacle, or extension cord plug in any waySection Do not use multiple cords Kickback Operate Your Pruner SafelyMaintain Your Unit in Good Working Order Kickback Safety FeaturesReduce the Chance Kickback Maintain ControlRecommended Attachments Blower SafetyCultivator Safety Transporting and StorageEdger Safety Hold the unit firmly with both handsTines Boots HazardZone 50 ft Meters Line Trimmer SafetyVacuum Safety Pruner Safety Reciprocating BladeSnow Thrower Safety Hedge Trimmer SafetyAssembly Operation Operating Position Installing Optional ATTACH- MentsInstalling Attachment Hanger Removing Pruner Attachment Or Other Optional ATTACH- MentsMaintenance BAR Maintenance Check Chain SharpnessLubrication Service and Adjustments Seasonal Storage Troubleshooting Table Cause RemedyLimited Warranty

545117550 specifications

The Poulan 545117550 is a versatile chainsaw designed for both professional and homeowner use. Known for its robust performance and user-friendly features, this chainsaw is an excellent choice for tackling a variety of tasks, from pruning branches to felling trees.

One of the standout features of the Poulan 545117550 is its powerful engine. Equipped with a 50cc two-stroke engine, it provides ample power for demanding cutting jobs. This engine is coupled with a solid chain and bar combination, offering a 20-inch bar length that allows for efficient cutting of larger logs and branches. The chain design ensures a smooth cut, reducing kickback and enhancing user safety during operation.

In addition to its performance capabilities, the Poulan 545117550 incorporates advanced technology for enhanced user experience and maintenance. The chainsaw features an easy-to-access air filter and a fuel system that allows for efficient fuel consumption. This means users can spend more time cutting and less time on maintenance and refueling. The engine is also designed with reduced emissions technology, making it an environmentally friendly choice in the world of power tools.

Comfort and control are essential aspects of any chainsaw, and Poulan addresses this with ergonomic features. The 545117550 is designed with a cushioned handle that reduces vibration and makes it easier to handle during prolonged use. The chainsaw's lightweight design, combined with the well-balanced structure, ensures that users can maneuver effectively and with less fatigue.

Safety features are another highlight of the Poulan 545117550. It comes equipped with a chain brake that activates in the event of kickback, offering added protection to the user. Additionally, the chainsaw includes a throttle lockout to prevent accidental starts, ensuring a safer working environment.

Overall, the Poulan 545117550 is an excellent chainsaw that combines power, efficiency, and safety. Its advanced features and technologies make it suitable for both novice users and experienced professionals, making it a reliable tool for any outdoor project. With its balance of performance and ease of use, the Poulan 545117550 stands out as a top choice for those in need of a dependable chainsaw for various cutting tasks.
Top Page Image Contents