Poulan PP5000P Service and Adjustments, Chain Sharpening, Chain Replacement, To Replace Chain

Page 11

SERVICE AND ADJUSTMENTS

WARNING: Always stop unit and dis- connect spark plug wire (or disconnect pow- erhead from power source) before performing maintenance, service, or adjustments except for carburetor adjustments.

CHAIN SHARPENING

Chain sharpening is a complicated task that requires special tools. We recommended you refer chain sharpening to a professional chain sharpener.

CHAIN REPLACEMENT

WARNING: Wear protective gloves when handling chain. The chain is sharp and can cut you even when it is not moving.

It is normal for a new chain to stretch during the first 15 minutes of operation. You should re- check your chain tension frequently and adjust the chain tension as required. See CHAIN TEN- SION section.

Replace the old chain when it becomes worn or damaged. Use only the Low-Kickback replace- ment chain specified in the repair parts list.

TO REPLACE CHAIN:

1.Move ON/OFF switch to the OFF position and disconnect spark plug (or disconnect powerhead from power source).

2.Remove bar clamp nut.

3.Remove bar clamp.

4.Turn adjusting screw by hand counter- clockwise until adjusting pin just touches the stop.

5.Slide guide bar behind sprocket until guide bar stops against sprocket.

6.Remove the old chain.

7.Carefully remove new chain from pack- age. Hold chain with the drive links as shown.

Cutter

Tip of

Bar

Drivelink

CUTTERS MUST FACE IN

DIRECTION OF ROTATION

Cutters

Depth Gauge

 

Drive Links

8.Place chain over sprocket, fitting the drive links in the sprocket.

9.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

10.Fit chain drive links into bar groove.

11.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

12.Now, install bar clamp making sure the adjusting pin is positioned in the lower hole in the guide bar.

Lower Hole

Adjusting Pin

Guide Bar

13.Install bar clamp nut and finger tighten only. Do not tighten any further at this point. Proceed to the CHAIN ADJUST- MENT section.

CHAIN ADJUSTMENT

See CHECK CHAIN TENSION in MAINTE- NANCE section.

11

Image 11
Contents 16/04 PP5000PPlan Ahead Identification of SymbolsSafety Rules UNIT/MAINTENANCE Safety Reduce the Chance Kickback Operate Your Pruner SafelyKickback Transporting and Storage Kickback Safety FeaturesMaintain Control Tools Required AssemblyInstalling Pruner ATTACH- Ment Shoulder Strap AssemblyOperation Operating Position Installing Attachment HangerInstalling Optional ATTACH- Ments BAR and Chain LubricationMaintenance To maintain guide bar BAR MaintenanceCheck Chain Sharpness LubricationChain Sharpening Service and AdjustmentsChain Replacement Chain AdjustmentSeasonal Storage Limited Warranty

PP5000P, 530163467 specifications

The Poulan PP5000P chainsaw is a robust and versatile tool designed for both professional landscapers and homeowners looking to tackle heavy-duty cutting tasks. Featuring a powerful engine and innovative technologies, this chainsaw has earned its place in the arsenal of many outdoor enthusiasts.

One of the standout features of the PP5000P is its 50cc 2-cycle engine, delivering an impressive power-to-weight ratio. This engine provides ample torque and performance, making it ideal for cutting through thick branches and logs with ease. It is engineered to handle demanding projects, whether you're felling trees, pruning limbs, or cutting firewood.

The PP5000P is equipped with a 20-inch bar and chain, which enhances its cutting capacity and efficiency. The longer bar allows for deeper cuts, enabling the operator to tackle larger timber without needing to make multiple passes. This is particularly beneficial for those needing to clear larger areas or manage substantial trees.

An important aspect of the PP5000P's design is its ergonomic features. The chainsaw is constructed with a comfortable grip that reduces hand fatigue during extended use. Additionally, the lightweight design ensures that users can maneuver the saw without excessive strain, contributing to overall ease of use.

The chainsaw also incorporates advanced technologies aimed at ensuring reliability and safety. Its Air Injection system enhances performance by removing larger dust and debris particles before they enter the air filter, promoting cleaner air intake and prolonging the life of the engine. The adjustable automatic oiler provides a steady supply of chain oil, ensuring that the chain remains lubricated during operation, reducing wear and tear on both the bar and chain.

Safety features are paramount, and the PP5000P comes with a chain brake that engages automatically in the event of sudden movement, preventing potential accidents. The low kickback chain design also assists in providing a safer cutting experience.

In terms of maintenance, the Poulan PP5000P is designed for ease of use. The quick-release air filter cover makes accessing the air filter hassle-free, and the transparent fuel tank allows users to easily monitor fuel levels, preventing unexpected shutdowns during work.

Overall, the Poulan PP5000P chainsaw, with its powerful engine, thoughtful design, and safety features, stands out as an excellent choice for those who require a reliable and effective cutting tool for various outdoor tasks. Whether for professional use or weekend projects, it combines performance and convenience to meet the needs of any chainsaw operator.