Infinity Kappa Series manual General Care Specifications, 10.1t, Declaration of Conformity

Page 3
Steen Michaelsen Infinity Systems A/S Birkerød. DENMARK. 2/98

Figure 3. After the Kappa10.1t tweeter is in its cup, hand tighten the nut to flush-mount the assembly on the panel.

NOTE: You must use the crossover supplied with the 10.1t tweeter. The crossover is con- tained in the shrink tube attached to the included speaker wire. If you must shorten the wire, do not remove the crossover, and be sure that its orientation is correct (indi- cated by position of connectors).

A NOTE ON POWER HANDLING

The Kappa 10.1t tweeters are designed to produce reasonable volume levels with little amplifier power. However, the addition of an amplifier to drive your speakers and a subwoofer will enhance the dynamic range of your system, and help overcome the ambient noise in a moving vehicle. Kappa speakers are designed to handle the power of a dedicated amplifier driven at or below its rated power. If an amplifier is driven far above its rated power, the output signal will “clip,” and the additional power present in a clipped signal can damage any speaker. Distorted or “fuzzy” sound from your speakers is an indication that the amplifier has exceeded its rated power, and you should reduce the volume level.

GENERAL CARE

 

SPECIFICATIONS

 

The loudspeaker grilles may be cleaned with a

 

 

 

slightly damp cloth. Do not use any cleaners or

 

10.1t

 

solvents on the grilles or the speaker drivers.

 

Type:

ComponentTweeter

 

 

Speaker Impedance:

4 ohms

 

 

Power Handling:

50 watts per channel

 

 

 

with crossover

 

 

Frequency

 

 

 

Response (± 3dB):

8kHz ~ 22kHz

 

 

Sensitivity:

89Hz @ 2.83 V, 1 watt

 

 

Crossover Frequency:

8000Hz

 

 

Cut-out Diameter Tweeter:

1-5/8" (42 mm)

DECLARATION OF CONFORMITY

We, Infinity Systems A/S

Kongevejen 194B

DK-3460 Birkerød

DENMARK

declare in own responsibility, that the product described in this owner’s manual is in compliance with technical standards: EN 50 081-1/1992

Infinity Systems, Inc. • 250 Crossways Park Drive,

®Woodbury, NY 11797 USA • (516) 496-3400 • FAX (516) 682-3583

EN 50 082-1/3.1995

- 3 -

Image 3
Contents Kappase R I E S S T R U C T I O N SDIAM. = 39.5 mm Speaker Placement Installation Warnings and TipsTweeter Installation Trim Ring EdgeGeneral Care Specifications 10.1tDeclaration of Conformity

Kappa Series specifications

The Infinity Kappa Series stands out as a premium line of car audio speakers, designed to deliver superior sound quality and aesthetic appeal. Renowned for their exceptional performance, this series caters to audiophiles seeking clarity, depth, and immersive audio experiences while on the road.

At the heart of the Kappa Series is its innovative technology. One of the standout features is the use of advanced materials in the construction of the speakers. The Kappa Series employs a patented "Plus One" cone design, which provides an extended cone area, allowing for improved bass response and higher efficiency. The larger surface area results in more air movement, translating to a fuller sound and greater volume without distortion.

Additionally, the Kappa speakers incorporate a sophisticated 1-inch soft dome tweeter, engineered to deliver smooth high frequencies. This tweeter is designed with a unique waveguide that enhances dispersion, ensuring a wider sound stage and allowing listeners to enjoy a balanced audio experience from various seating positions in the vehicle.

The Infinity Kappa Series also emphasizes durability and resilience, featuring robust materials and a weather-resistant design. This makes them suitable for a variety of environments, whilst maintaining performance in humid or extreme conditions. Their sturdy construction minimizes distortion, ensuring clarity even at higher volumes.

Installation versatility is another hallmark of the Kappa Series. Many models come with adjustable mounting options, allowing for easy integration into a wide range of vehicles. Their sleek and modern aesthetic complements various interior styles, making them a visually appealing addition to any car audio system.

Moreover, Infinity’s commitment to research and development is evident in the Kappa Series tuning; engineers have meticulously calibrated the speakers for optimal performance, resulting in a rich, dynamic sound that pleases even the most discerning listeners.

In summary, the Infinity Kappa Series is a blend of advanced technology, premium materials, and meticulous engineering, offering car audio enthusiasts a compelling solution for high-quality sound. With their ability to deliver deep bass, clear highs, and a robust construction, these speakers truly embody the essence of high-performance automotive audio. Whether upgrading existing systems or starting from scratch, the Kappa Series is a worthy investment for anyone seeking to transform their in-car listening experience.