Poulan 1000E Installing Attachment Hanger, Operating Position, Setting the Edging Depth

Page 7

4.Before using the unit, tighten the knob se- curely by turning clockwise.

INSTALLING ATTACHMENT

HANGER

An attachment hanger is provided for storage when attachment is not in use.

To install hanger on attachment:

1.Remove the tube cap from the attachment (if present) and discard.

2.Press and hold the locking/release button.

3.Push hanger onto the attachment until the locking/release button snaps into the hole.

OPERATING POSITION

ALWAYS WEAR:

Eye Protection

Long Pants

Heavy Shoes

When operating unit, stand as shown and check for the following:

SWear eye protection and heavy clothing.

SKeep right arm slightly bent with right hand holding the trigger handle of powerhead.

SKeep left arm extended with left hand hold- ing the handlebar.

SKeep unit below waist level.

SAdjust edger wheel for proper cut depth.

WARNING: Never attempt to adjust the edger wheel when the unit is in operation. Always stop the powerhead, wait until the blade stops turning, and disconnect the spark plug (or disconnect powerhead from power source) before making adjustments.

EDGING

As you become familiar with use of your edger attachment, you will be able to determine your own operating pace. Conditions such as depth of cut and material being cut will regu- late the speed and time required for your edg- ing job.

SAllow the engine to warm up before you begin

edging.

SIncrease the engine speed before placing the blade in the cut. For best results, run the en- gine at full throttle while cutting.

S Always work going away from people and solid objects such as walls, large stones, trees, automobiles, etc.

SBe careful when edging near trees or valuable plants. The high speed metal blade may cut

roots and cause damage to the plants.

SIf the blade stalls, immediately move the unit back slightly to allow the blade to restart. If the blade continues to stall, stop the engine, dis- connect the spark plug, and inspect for block- age or damage.

WARNING: Keep the blade area clean. Always release the throttle trigger, move the powerhead ON/OFF switch to the OFF position, disconnect the spark plug (or disconnect powerhead from power source), and make sure the blade has completely stopped turning before cleaning.

SETTING THE EDGING DEPTH

WARNING: Never attempt to adjust the cut depth when the engine is running. Al- ways release the throttle trigger, wait until the blade stops turning, move the powerhead ON/OFF switch to the OFF position, and dis- connect spark plug (or disconnect from pow- er source) before making adjustments.

Depth Adjustment Knob

1.Loosen the depth adjustment knob.

2.Slide the wheel to the desired position.

S Raising the wheel will increase the cut- ting depth.

S Lowering the wheel will decrease the cutting depth.

3.Tighten the depth adjustment knob se- curely.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Safety Information On the Unit Operator SafetyEdging Safety UNIT/MAINTENANCE SafetyReleased Transporting and StorageAttachment END Handlebar AssemblyPowerhead END Tools RequiredLocking Lever Blade Depth Adjustment KnobInstalling Attachment Know Your Edger AttachmentEdging Installing Attachment HangerSetting the Edging Depth Operating PositionCheck for Damaged or Worn Parts Inspect and Clean Unit and DecalsBlade Maintenance Blade ReplacementSeasonal Storage

1000E specifications

The Poulan 1000E is an exceptional chainsaw designed for both professional landscapers and avid DIYers. Known for its robust performance and user-friendly features, this model has garnered attention for its reliability and power.

One of its main features is the 18-inch bar and chain, which allows for efficient cutting of medium to large trees and branches. The size strikes a balance between reach and maneuverability, making it useful for various tasks ranging from limbing to felling. Armed with a powerful 42cc two-stroke engine, the Poulan 1000E delivers impressive cutting power, enabling users to tackle demanding jobs with ease.

The chainsaw is equipped with a patented Effortless Start technology that reduces the effort required to start the engine. This feature is particularly valuable for users who want to minimize downtime and get straight to work. The automatic oiling system also ensures that the chain and bar are well-lubricated during use, enhancing the longevity of the tool and maintaining cutting efficiency.

Safety is another significant consideration in the design of the Poulan 1000E. It features a front-hand guard to protect against kickback, as well as a chain brake for added safety when needed. The lightweight design of the chainsaw enhances maneuverability while reducing operator fatigue, making longer cutting sessions more comfortable.

The poulan 1000E is designed with user convenience in mind. Its easy-access air filter simplifies maintenance, allowing users to quickly check and replace the filter when needed. Additionally, the tool-less chain tensioning system lets users adjust the chain without the need for extra tools, further streamlining operations and enhancing user experience.

Another notable characteristic of the Poulan 1000E is its ergonomic handle design. The comfort grip ensures a secure hold, reducing vibration and improving control during cutting tasks.

In summary, the Poulan 1000E stands out in the competitive chainsaw market with its blend of power, safety features, user-friendly technologies, and ergonomic design. It is an ideal choice for anyone looking for a reliable and efficient chainsaw to tackle a wide range of cutting tasks. Whether you’re a professional or a weekend warrior, the Poulan 1000E delivers the quality and performance you need to get the job done effectively.
Top Page Image Contents