5 | LOWER CHUTE - MOWER WITH |
MOUNTING TAB (See Fig. 5A) |
1.Raise and hold defl ector shield in upright position.
2.Place slot in lower chute over tab on mower and position lower chute over mower opening as shown.
3.Hook rear latch into fl ange hole on back of mower.
4.Hook front latch into tab hole on front of mower.
•If your tractor is equipped with gauge wheels on the deck, then it will be necessary to hook the rear latch into the hole in the R.H. gauge wheel bracket.
CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.
DEFLECTOR SHIELD
HINGE BRACKET
EXTENDED EDGE "B"
Must be under deflector shieldTAB and along side the hinge bracket
DEFLECTOR
SHIELD
03058
REAR GAUGE WHEEL
BRACKET
FRONT
LATCH
WITH REAR
GAUGE WHEELS
REAR LATCH | WITHOUT | REAR LATCH |
GAUGE WHEELS |
| |
| FIG. 5A |
|
7