Poulan 156235, C342B, 954 04 05-03 owner manual Safe Operation Practices for Ride-On Mowers

Page 2

SAFETY RULES

Safe Operation Practices for Ride-On Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

I. GENERAL OPERATION

Read, understand, and follow all instructions in the manual and on the machine before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the machine.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

Be sure the area is clear of other people before mowing. Stop machine if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the guard in place.

Slow down before turning.

Never leave a running machine unattended. Always turn off blades, set parking brake, stop engine, and remove keys before dismounting.

Turn off blades when not mowing.

Stop engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the machine while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the machine into a trailer or truck.

Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury.

Keep machine free of grass , leaves or other debris build-up which can touch hot exhaust / engine parts and burn. Do not allow the mower deck to plow leaves or other debris which can cause build-up to occur. Clean any oil or fuel spillage before operating or storing the machine. Allow machine to cool before storage.

II. SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tipover accidents, which can result in severe injury or death. All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

DO:

Mow up and down slopes, not across.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low gear so that you will not have to stop or shift while on the slope.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope.

DO NOT:

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the pres- ence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and under the watchful care of another responsible adult.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Never allow children to operate the machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

IV. SERVICE

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep machine free of grass, leaves, or other debris build- up. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer's recommended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

2

Image 2
Contents Model No. C342B Product No 04 Inch Mower Grass Catcher Safe Operation Practices for Ride-On Mowers Table of Contents BAG of Parts Contents BAG of Parts Contents Tractor Drawbar Style a Style B AssemblyParts Identification See Figs A, 1B & 1C Use Hardware - Group a Rear Mounting BracketSupport Tube Drawbar with Upper Corner Ribs Style aUse Hardware - Group B No hardware requiredSupport Post See Fig Use Hardware - Group C & DContainer Assembly See Fig Lower Chute See Figs a & 7B Use Hardware - Group E With Without Gage WheelsUpper Chute See Figs a & 9B Chute Latch AssemblySee Fig Level Mower DeckOperation Tips for Improved Bagging OperationBlade Care MAINTENANCE,SERVICE or Adjust MentsCustomer Responsibilities See Template PreparationDrill Support Tube Mounting Holes in Drawbar Drill TWO 7/16 Holes Page Page 202 434 KEY Part Description

156235, 954 04 05-03, C342B specifications

The Poulan 954 04 05-03, C342B, 156235 is a highly innovative and efficient tool that stands out in the realm of outdoor power equipment. Known for its durability and reliability, this model is designed for both professional landscapers and home gardeners. It incorporates advanced features and technologies that make yard maintenance tasks easier and more efficient.

One of the main features of the Poulan 954 04 05-03 is its robust engine performance. The powerful engine ensures that users can tackle even the most challenging tasks with ease. The design minimizes vibrations, providing a smoother operational experience, which is essential when using the tool for extended periods. This engine is also designed to enhance fuel efficiency, allowing longer working times between refuels.

Another notable characteristic is the ergonomic design of the tool. The handle is crafted for comfort, featuring a grip that reduces fatigue. Additionally, the balanced weight distribution of the tool helps in maneuverability, making it easier to handle during intensive jobs whether trimming hedges or maintaining lawns.

The Poulan C342B model is recognized for integrating advanced technologies that set it apart from competitors. It features a reliable starter system that ensures easy starts, even in cold weather conditions. This is particularly convenient for users who need to get to work quickly without the frustration of a traditional pull-start system.

Moreover, the Poulan 956 04 05-03 incorporates an adjustable cutting height feature, allowing users to customize the cutting length based on specific gardening needs. This flexibility makes it suitable for various grass types and landscaping designs, ensuring a healthy lawn while allowing creativity in outdoor spaces.

Durability is another strong point for this model. Constructed from high-quality materials, the Poulan 954 04 05-03 is designed to withstand harsh weather conditions and the rigors of frequent use. This resilience contributes to a longer lifespan and a lower overall maintenance requirement.

In summary, the Poulan 954 04 05-03, C342B, 156235 combines powerful performance, user-friendly design, and advanced technology, making it an excellent choice for anyone looking to invest in a dependable outdoor power tool. With its blend of innovation and functionality, users can expect superior results in their gardening and landscaping efforts, ensuring their outdoor spaces remain pristine and well-maintained.