Partner Tech P4-20XT, P33XT Operating Your Unit, Before Starting Engine BAR and Chain Lubrication

Page 8

Adjusting

Screw

Chain Brake Nuts

Guide Bar

Adjusting Screw -- 1/4 Turn

SLift up the tip of the bar and securely tight-

en the chain brake nuts with the bar tool.

SRecheck chain tension.

Chain Brake

Nuts

WARNING: If the saw is operated with a loose chain, the chain could jump off the guide bar and result in serious injury.

WARNING: Muffler is very hot during and after use. Do not touch the muffler or al- low combustible material such as dry grass or fuel to do so.

OPERATING YOUR UNIT

BEFORE STARTING ENGINE

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Contact an authorized service dealer.

BAR AND CHAIN LUBRICATION

The bar and chain require continuous lubri- cation. Lubrication is provided by the auto- matic oiler system when the oil tank is kept filled. Lack of oil will quickly ruin the bar and chain. Too little oil will cause overheating shown by smoke coming from the chain and/ or discoloration of the bar.

Only use Bar and Chain Oil for bar and chain lubrication.

Oil Cap

Fuel mix cap

 

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

This engine is certified to operate on unleaded gasoline. Before operation, gasoline must be mixed with a good quality 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. A 40:1 ratio is obtained by mixing 0,125 liter of oil with 5 liters of unleaded gasoline. DO NOT USE automotive or boat oil. These oils will cause engine damage. When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel sys-

tem of an engine while in storage. To avoid engine problems, empty the fuel system be- fore storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

CHAIN BRAKE

Ensure chain brake is disengaged by pulling the front hand guard back toward the front han- dle as far as possible. The chain brake must be disengaged before cutting with the saw.

WARNING: The chain must not move when the engine runs at idle speed. If the chain moves at idle speed refer to CAR- BURETOR ADJUSTMENT within this manual. Avoid contact with the muffler. A hot muffler can cause serious burns.

To stop the engine, move the ON/STOP switch to the STOP position.

To start the engine, hold the saw firmly on

the ground as illustrated below. Make sure the chain is free to turn without contacting any object.

Use only 15″ --- 18″ of rope per pull.

Hold saw firmly while pulling starter rope.

IMPORTANT POINTS TO REMEMBER

When pulling the starter rope, do not use the full extent of the rope as this can cause the rope to break. Do not let starter rope snap back. Hold the handle and let the rope rewind slowly.

For cold weather starting, start the unit at full choke; allow the engine to warm up before squeezing the throttle trigger.

NOTE: Do not cut material with the choke/fast idle lever at the FULL CHOKE position.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSBetriebsanweisung ON/STOP Identification What is WHAT?Identification of Symbols Operate Your SAW Safely Safety RulesPlan Ahead Chain SAW Safety Equipment Maintain Your SAW in Good Working OrderHandle Fuel with Caution JustmentsMaintain Control KickbackReduce the Chance Kickback Attaching the Bumper Spike AssemblyKickback Safety Features Inside view Chain Brake Adjustment located on Chain Brake Attaching the BAR & ChainIf not already attached Drive Links Place chain onto the sprocketOperating Your Unit Before Starting Engine BAR and Chain LubricationFueling Engine Chain BrakeStarting a Warm Engine Difficult Starting or starting a flooded engineChain Brake Braking function controlCutting Methods Important PointsFelling Large Trees Notch CUT and Felling the TreeBucking Using a LOG or SUP- Port Stand Cutting a Fallen TreeImportant points Types of Cutting Used for BuckingService and Adjustments Limbing and Pruning Important PointsLimbing PruningBAR Maintenance Carburetor AdjustmentsSpark Plug Chain SharpeningDeclaration of Conformity Troubleshooting Table Cause RemedyLoad Adjustment Engine Technical Data Sheet

P351XT, P33XT, P4-18XT, P4-20XT specifications

Partner Tech is a prominent name in the world of point-of-sale (POS) equipment, and its lineup of terminals—including the P4-20XT, P33XT, P4-18XT, and P351XT—showcases the company’s commitment to innovation, reliability, and user-friendly design. These models cater to various business needs and environments, making them suitable for retail, hospitality, and various service industries.

The P4-20XT stands out with its sleek 20-inch display, ideal for interactive customer engagement. It features a robust design with an anti-glare screen, ensuring visibility under various lighting conditions. The terminal is equipped with high-performance Intel processors, which facilitate quick transaction processing and multitasking capabilities. With customizable peripherals, such as barcode scanners and payment terminals, the P4-20XT offers flexible connectivity options to streamline operations.

Moving on to the P33XT, this model features a compact design that doesn’t sacrifice performance. The 15-inch LCD touchscreen is suitable for limited counter spaces while still offering vibrant graphics and responsive touch functionality. It integrates various connectivity options, including Wi-Fi and Bluetooth, ensuring seamless communication with other devices. The P33XT is designed with durability in mind, featuring a fanless cooling system and rugged construction that can withstand the rigors of busy environments.

The P4-18XT provides a balance of performance and size, featuring an 18-inch display that is versatile for various operational needs. It supports multiple peripherals and has an ergonomic design that enhances user interaction. This terminal is equipped with advanced security features, including encryption support, which ensures safe processing of customer transactions.

Finally, the P351XT is a powerhouse designed for high-demand environments. Its larger touchscreen interface provides ample space for various applications, while the powerful processor ensures quick data processing. The P351XT’s scalability is a key advantage, allowing businesses to customize the system with various modules and attachments that suit their specific requirements. Additionally, it provides advanced reporting and analytics tools, helping businesses make informed decisions based on real-time data.

In conclusion, the Partner Tech P4 series, including the P4-20XT, P33XT, P4-18XT, and P351XT, showcases the company's dedication to enhancing the retail experience through advanced technology, robust design, and exceptional user functionality. These terminals are reliable, adaptable, and equipped with the latest features to meet the challenges of modern business environments.
Top Page Image Contents