EN
To ensure a level plane:
Put a few drops of water on the cross at the base of the funnel to check the horizontal level.
1
3 2
4
Water will pool to the center of the cross when the rain gauge is level.
If water remains on
NOTE For best results, ensure the base is horizontal to allow maximum drainage of any collected rain.
TIP Press RESET button on base station to erase all testing data.
CLOCK RECEPTION
This product is designed to synchronize its calendar clock automatically once it is brought within range of a radio signal:
WMR88:
•EU:
•UK:
WMR88A:
•
WMR88 only - slide the EU / UK switch to the appropriate setting based on your location. Press RESET whenever you change the selected setting.
The reception icon will blink when it is searching for a signal. If the radio signal is weak it can take up to 24 hours to get a valid signal reception.
indicates the status of the clock reception signal.
ICON | MEANING |
| Time is synchronized. |
| Receiving signal is strong |
|
|
| Time is not synchronized. |
| Receiving signal is weak |
To enable (and force a signal search when previous search was unsuccessful) / disable the clock radio reception:
1. Press SELECT to navigate to the Clock / Calendar / |
|
Moon phase Area. will show next to the Area. | 6 |
|
2.Press and hold SEARCH. appears when it is enabled.
NOTE For best reception, the base station should be placed on a flat,
CLOCK / CALENDAR
To set the clock manually, disable the clock signal reception first.
To manually set the clock:
(You only need to set the clock and calendar if you have disabled the clock radio reception.)
1. Press SELECT to navigate to the Clock Area. will show next to the Area.
2.Press and hold MODE to change the clock setting. The setting will blink.
3.Press UP / DOWN to increase / decrease the setting value.
4.Press MODE to confirm.
5.Repeat steps 3 to 4 to set the time zone offset hour (+ /
Time zone offset sets the clock +/- 23 hours from the received clock signal time. If you have deactivated the clock signal reception, do not set a value for time zone.
NOTE If you enter +1 in the time zone setting, this will give you your regional time plus 1 hour.
If you are in the US (WMR88A only) set the clock to:
PA for Pacific time | MO for Mountain time |
CE for Central time | EA for Eastern time |
NOTE The weekday is available in English, German, French, Italian, Spanish or Russian.
To change the clock display:
1.Press SELECT to navigate to the Clock Area. will show next to the Area.
2.Press MODE to toggle between:
•Clock with seconds
•Clock with weekday
•Calendar
MOON PHASE
The Calendar must be set for this feature to work (see Clock / Calendar section).
| New |
| Full Moon |
| Moon |
| |
|
|
| |
|
|
|
|
| Waxing |
| Waning |
| Crescent |
| Gibbous |
|
|
|
|
| First |
| Third |
| quarter |
| quarter |
|
|
|
|
| Waxing |
| Waning |
| Gibbous |
| Crescent |
|
|
|
|