Hand Filing Instructions OREGON® 91VG
FILE SIZE: Use a 5/32” round file and file guide
FILE HANDLE | FINISHED | |||
FILING ANGLE: | DOWN ANGLE: | *See warning below |
| CUTTER: |
|
|
| .025” |
|
30˚ | .0˚ |
|
|
|
| Grinding Instructions OREGON® 91VG |
| ||
|
| GRINDING WHEEL THICKNESS: 1/8” |
| |
| FINISHED | |||
GRINDING ANGLE: | SHARPNESS ANGLE: | DOWN ANGLE: | *See warning below | CUTTER: |
| 50˚ |
| .025” |
|
|
|
|
| |
30˚ |
| .0˚ |
|
|
Failure to follow filing instructions can increase the level of kickback which can result in severe
injury to the saw operator or bystanders.
*Do not exceed the
*Always file depth gauges back to their original rounded or ramp shape after lowering
Oregon® 91VG saw chain is
CSA Z62.3 (Canada) when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining
ALL CUTTING SAW CHAIN CAN KICKBACK, which may result in severe injury to the saw operator or bystanders. Operate your saw safely. Read and follow all warnings
in your chainsaw operator’s manual.
Maintenance Tools
File Size | Assembled File | Round Files | Depth Gauge | Flat File | Bench Grinder | Mini Grinder | |
| Guide |
|
| Tool, .025” |
| Wheel 5 3/4” | Wheel, 4 1/8” |
5/32” | 37534 (EA.) | 70504 | 22290 | 12211 | |||
|
| 40458 |
|
|
|
| |
Chain Replacement Parts
Chain Type | Tie Strap | Preset Tie Strap | Drive Link | ||
91VG | P21693 | P21694 | P24295 | P25068 | P21721 |
NOTE: Individual parts packages contain 25 pieces.
For more information on these and other Oregon® products, contact your authorized Oregon® distributor, or:
OREGON CUTTING SYSTEMS DIVISION, BLOUNT, INC. PO Box 22127 · Portland, OR, U.S.A.
Phone: | Fax: | Web: http://www.oregonchain.com |
IN CANADA: OREGON DISTRIBUTION LTD. 505 Edinburgh Rd. N., Guelph, Ontario, Canada N1H 6L4 | ||
Phone: | Fax: | Printed in USA 91VG F&B A107041 AA 0806 |