Scag Power Equipment SSZ operating instructions Safety Instructions

Page 3

Your mower was built to the highest standards in the industry. However, your mower is only as safe as you, the operator, make it. Carelessness or error on the part of the operator may result in serious bodily injury. Hazard control and accident prevention depend upon the awareness, con- cern, prudence, and proper training of the personnel involved in the operation, transport, and storage of this equipment. Make sure every operator is properly trained and thoroughly familiar with all of the controls and safety instructions before operating the equipment.

SAFETY INSTRUCTIONS

WARNING:

Do not operate mower on steep slopes. Riding lawn mowers can tip over when used on an excessive slope. To check a slope, attempt to back up with cutter deck down. If wheels slip when backing up slope, stay off the slope. If you are in doubt about hillside operation, stay off the slope.

Always back up when loading a machine on ramps or tilt bed trailers.

1.Know the controls and how to stop quickly. READ THIS OPERATOR’S MANUAL and instructions furnished with attachments. A replacement Operator's Manual is available from your Scag Servicing Dealer. To order, contact your dealer with the complete model number and serial number of your Scag product.

2.Do not allow children to operate this machine. Do not allow adults to operate this machine without proper instruction.

3.Do not carry passengers. Never mow toward or near anyone.

4.Clear the area of objects such as wires, sticks, and rocks that can be picked up and thrown by the mower blades.

5.Disengage all attachment clutches and engage parking brake before attempting to start the engine.

6.Disengage all attachment clutches and engage the parking brake before leaving the operator’s position.

7.Disengage the power to attachments, stop the engine, and remove the key before making any repairs or adjustments.

8.Disengage the power to attachments when transporting the machine or when attachments are not being used.

9.Take all possible precautions when leaving the machine unattended including disengaging the power to attachments, lowering the attachments, setting the parking brake, and removing the key.

10.Do not stop or start suddenly when going up or down a hill. Mow up and down the face of slopes; never mow across slopes.

11.Reduce speed and be very careful when operating on slopes or making sharp turns to prevent tipping or loss of control. Be especially cautious when changing direction on slopes. If necessary to turn on a hill, always turn downhill.

12.Watch for holes, rocks, roots in the terrain, and other hidden hazards. Keep away from dropoffs.

13.Watch for traffic when crossing roadways or operating near roadways.

14.When using any attachments, never directly discharge materials towards bystanders or allow anyone near mower while it is operating.

15.Handle gasoline with care - it is highly flammable.

a.Use an approved gasoline container only.

b.Never remove the fuel cap while the engine is running or hot. Allow the engine to cool for several minutes before removing the cap and adding gasoline. Never fill the fuel tank indoors. Always clean up spilled gasoline.

c.Do not run the engine indoors.

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents OPERATOR’S Manual SSZ-18, 20, and 22CV Remember Your Mower is only AS Safe AS the OperatorSafety Instructions Safety Instructions CONT’D Hydraulic Safety AdjustmentsNeutral Adjustment Adjustments CONT’D Neutral Adjustment ContdStraight Line Running Adjustment Cutter Deck Drive Belts Straight Line Running Adj. ContdDrive Belt Replacement Hand Control Handle PositionInitial RUN, INSPECTION, and Operating Instructions See page3 Initial RUN, INSPECTION, and Operating Instructions CONT’DMaintenance Free WheelingCutter Blades Curb Climbing Maintenance ContdProcedure Comments Lubrication & MaintenanceCondition Cause Cure Troubleshooting Cutting ConditionsScalloped Cut, or Rough Contour TroubleshootingScalping Blades MODELSSSZ-18CV, SSZ-20CV, SSZ-22CV, ALL SSZ-LT Specifications for Scag SSZ ZERO-TURN RiderCutter Deck MODELSSSZ-18CV,SSZ-20CV, SSZ-22CV, ALL SSZ-LT48, 52 & 61 Cutter Decks No. Number Description 48, 52, & 61 Cutter Decks CONT’DDeck Cutter Deck Controls 48, 52, & 61 DecksPart Number Description Cutter Deck Controls 48, 52, & 61 Decks CONT’DSheet Metal Components Sheet Metal Components CONT’D Hydraulic Components Hydraulic Components CONT’D BDU-10L Hydraulic Pump Axle Assembly Traction Drive Components Bolt, 5/16-18 x 1-1/2 Serr. Flng. Hex Head Brake and Steering Controls Brake and Steering Controls CONT’D Instrument Panel and Electrical Components Instrument Panel and Electrical Components Electrical Wiring Diagram Kohler Heavy Duty Commercial Replacement DecalsRotating Blades and Belts Spring Tension on Idler MODELSSSZ-18CV, SSZ-20CV, SSZ-22CV MODELSSSZ-18CV,SSZ-20CV, SSZ-22CV Limited WARRANTY-COMMERCIAL Equipment 1997

SSZ specifications

Scag Power Equipment is renowned for its high-performance lawn care machinery, and the Scag SSZ zero-turn riding mower exemplifies their commitment to quality, durability, and cutting-edge technology. Designed to meet the needs of professional landscapers and homeowners alike, the SSZ combines power, efficiency, and comfort.

One of the standout features of the Scag SSZ is its robust engine options. Equipped with commercial-grade engines, including powerful Kawasaki and Kohler engines, the SSZ offers impressive horsepower, allowing it to tackle even the toughest mowing tasks with ease. This power translates into a high ground speed, enabling users to cover large areas quickly without compromising on the quality of the cut.

The SSZ also features a wide cutting deck, usually available in sizes ranging from 48 to 61 inches. This ensures that users can mow a larger area in fewer passes, significantly reducing mowing time. The cutting deck is constructed from heavy-duty steel, offering exceptional durability and resistance to wear, while its design promotes a superior cutting performance with a clean finish.

In terms of technology, the Scag SSZ incorporates an advanced hydrostatic drive system. This ensures a smooth and responsive operation, allowing operators to control speed and direction effortlessly, simply by using the lap bars. The zero-turn capability of the SSZ enables it to maneuver around obstacles with precision, making it an ideal choice for mowing complex landscapes.

Operator comfort is a priority in the design of the SSZ. The mower is equipped with a high-back seat complete with armrests, providing excellent support during long mowing sessions. Additionally, the adjustable seat allows users to find their perfect riding position, enhancing the overall experience.

Another notable characteristic of the SSZ is its ease of maintenance. Scag Power Equipment has engineered the mower with user-friendly features, such as accessible engine components and a simple belt system, allowing for quick and hassle-free servicing.

In summary, the Scag Power Equipment SSZ is a powerful, efficient, and comfortable zero-turn mower that combines advanced technology with practical features. Whether for professional landscaping or residential use, the SSZ is designed to deliver outstanding performance and reliability, making it a preferred choice among lawn care enthusiasts. Its blend of power, durability, and innovative design reflects Scag's dedication to providing top-tier lawn care equipment.
Top Page Image Contents