3.Attach the mounting brackets to the cross bar between the wheel motor brackets using (4)
The Tiger Striper cannot be installed on an STC with a serial number below 7630001.
(4x)
Mounting
Spacer
Mounting
Bracket 
Mounting
Spacer
(8x) Serrated Flange
Nuts
Mounting 
Bracket
FIGURE
4.The edge of the mounting bracket should be under the wheel motor mounting plate for proper installation. See Figure
5.Install the Tiger Striper roller assembly to the mounting brackets and secure with the quick pins.
6.Once the Tiger Striper roller assembly is installed and secure, tighten the mounting hardware on both mounting brackets.
7.Follow Section 2.2 Operating Instruction for proper operation.
4.1 LAWN STRIPING
HOW DOES LAWN STRIPING WORK?
The “stripe” that you see on the lawn is actually light reflecting off the blades of grass. The direction in which the grass is bent determines the “light” or “dark” stripe. When the blades of grass are bent away from you, the grass appears lighter in color because light is reflecting off of the length of the blade. When the blades of grass are bent towards you, the stripe appears darker as you are looking at more of the tips of the blades (a smaller reflective surface) and the shadows under the blades of grass. Cutting a lawn in the up/down, north/south, east/ west, opposing directions provides the best stripe effect.
You may find that certain grasses have a more noticeable stripe (stripe easier) than others. Cutting the grass at a different height can sometimes change the intensity of the stripe. A slightly higher cut (example: 3" versus 2.5") can provide more grass to be bent over, thus producing a more noticeable stripe. In some types of grass, this may have the opposite or no effect.
Grass that tends to be "stiff" and resists bending will not yield a stripe as well as a softer grass that bends easily.
Note that you do not need to cut the grass in order to stripe it. The roller simply needs to be in the unlocked/engaged position. You may find that when creating more advanced, overlapping striping patterns, you can complete the job faster by applying the overlaying stripes without the blades engaged.
Striping can be used to draw attention to particular landscape features. It can be used to further enhance the finished, manicured cut that your Scag mower delivers.
4