Introduction

This manual has been prepared to provide the information you need to correctly assemble, operate and maintain this attachment. Read it carefully and keep it for future reference. Should you ever need repair parts or service, contact your authorized Scag Service Dealer.

Any reference made in this manual concerning the RH or LH sides are determined with the operator in the normal operating position.

The replacement of any part on this product by other than the manufacturer's authorized replacement part may adversely affect the performance, durability or safety of this product.

SAFETY AND OPERATING INSTRUCTIONS

To avoid personal injury, it is imperative that all safety instructions be observed.

Your sulky was built to the highest standards in the industry. However, the use of a riding sulky, when attached to a walk behind mower, is only as safe as the operator. Carelessness or error on the part of the operator may result in serious bodily injury.

Please read and follow these instructions on safe operation, and be certain anyone using this sulky is familiarwiththeserules.

1.Read this technical manual and the technical manual that is supplied with the machine this attachment is used on. A replacement manual is available by sending complete model and serial number to:

Scag Power Equipment

1000 Metalcraft Dr.

P.O. Box 152

Mayville, WI 53050

2.Do not operate this sulky on steep slopes.

3.Do not run over rocks, holes or other obstructions that may make the sulky unstable.

4.Always keep both hands on the steering controls when using the mower with the sulky attached.

5.When operating the mower in reverse, make certain that there are no obstructions behind you.

6.Have a first time operator practice driving the mower and sulky in an open, level area before operating under actual mowing conditions.

7.Before leaving the sulky seat: l Disengage blade clutch l Engage both neutral locks

l Pull speed control lever to neutral l Apply the parking brake

l Wait for all movement to stop