Scag Power Equipment STHM manual Mower Operation, Use gasoline with an octane rating no less than

Page 12

MOWER OPERATION

1.Readandunderstandthesafetyinstructions before attempting to operate this machine.

2.Before starting the engine:

*Check the oil level in the engine and the hydraulic reservoir.

*Fill the fuel tank with clean, fresh, lead-free gasoline.

*Open the fuel valve on the bottom of the fueltank.

-NOTE-

Use gasoline with an octane rating no less than 87.

*The right hand foot pedal must be in the NEUTRAL position.

*The blade clutch switch must be in the OFF position.

*The parking brake must be ON.

3.Start the engine:

*Choke as required. If the engine is cold, pull the choke knob out. When the engine starts, slowly push the choke in. If the engine stalls, repeat the above operation. When the engine is warm, choking may not be necessary.

4.Depress the left hand operator presence pedal.

5.Engage the cutter blades bypulling the blade clutch switch into the ON position. Push the switch to the OFF position to disengage the cutter blades.

PULL UP TO ENGAGE

PUSH DOWN TO DISENGAGE

390S0138

-NOTE-

When the PTO is engaged or (possibly) disen- gaged, a squealing sound from the underside of the machine is normal. It is caused by the electric clutch plates meshing as the cutter blades come up to speed. For best equipment life, engage the clutch with the engine at 3/4 throttle, not under full load.

WARNING:

If you are not familiar with the operation of the hydrostatic drive, practice turning and maneuvering before engaging the cutter blades.

5.Release the parking brake. Depress the right foot pedal at the toe end to drive forward (See Figure 1) or depress the pedal at the heel end to drive in reverse. (See Figure 2)

-NOTE-

The left side operator presence pedal must be depressed for operation.

sgb002

Depress Toe End of Pedal

Figure 1. Forward Operation

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Remember Your Mower is only AS Safe AS the Operator STHM-23CV SM-61V SM-72ATable of Contents Model Sthm Table of Contents Introduction Signal Words General Safety InstructionsISO Symbols CE Mark Fast Slow Before Operating While Operating Maintenance and Storage Page Mower Operation Use gasoline with an octane rating no less thanAdjustments Neutral AdjustmentNeutral Adjustment Belt TensionCutter Deck Adjustments Belt AlignmentCutter Blade Adjustment CUSTOM-CUT Baffle Adjustment Cutter BladesCustom-Cut Baffle Position Lubrication & Maintenance Procedure CommentsTroubleshooting Cutting Conditions Cause CureTroubleshooting Condition Cause CureScalping Blades Technical Specifications EnginesAdditional Specifications Page SM-61V & SM-72A Cutter Deck Ref. Part Description No.Description 101 100 103 Engine Deck Part Number DescriptionUpper Hydraulics Upper Hydraulics Lower Hydraulics 48911-01 Compression Fitting 48350-12 Elbow, 90 Deg Control Linkage Control Control Linkage Ref. Part No. Number DescriptionInstrument Panel Andelectricalcomponents Instrument Panel and Electrical Components Rider Frame Assembly Rear Wheel Assy. includes items 33-36, 37A Brake Linkage Serr. Fl. HH Nut, 3/8-16 Hex Locknut, 3/8-16 43032 Wire Harness with Relay Winch Lift System Replacement Decals & Information Limited Warranty Commercial Equipment
Related manuals
Manual 66 pages 55.15 Kb

STHM specifications

Scag Power Equipment has long been known for its high-quality, reliable machinery, and their STHM line of products showcases some of the best features and technologies available in the landscaping equipment world. The STHM stands for Scag Turf-Hawk Mower, which combines efficiency and performance for both professional landscapers and homeowners seeking a durable mowing solution.

One of the standout features of the STHM is its robust engine options. With powerful engines from trusted brands, users can enjoy increased cutting performance and fuel efficiency. This ensures that the mower is not only capable of handling tough jobs but can also operate for extended periods without frequent refueling. The machinery is designed with professional landscapers in mind, providing them with the horsepower needed to tackle larger properties and more demanding conditions.

Another notable aspect of the STHM is its cutting deck design. Scag Power Equipment meticulously engineers their cutting decks for optimal airflow and discharge, creating a clean and even cut every time. The deck is often made of heavy-duty steel, ensuring durability and resistance to wear and tear. With adjustable deck heights, users can easily customize their mowing performance to suit different grass types and terrain conditions.

User comfort and control are also prioritized in the design of the STHM. The ergonomic controls and comfortable seating allow operators to work longer with less fatigue. Features like vibration dampening and adjustable armrests contribute to a smoother ride, making the entire mowing experience more pleasant.

In terms of technology, the STHM is equipped with advanced features such as precision steering and responsive handling. The zero-turn capability empowers users to maneuver around obstacles with ease, increasing efficiency and reducing mowing time. Additionally, some models include digital displays that provide real-time information about engine performance, fuel levels, and maintenance reminders, ensuring that the equipment runs optimally.

Maintenance is a breeze with the STHM thanks to features like easy-access service points, making routine upkeep simple and efficient. Users can quickly check oil levels, replace filters, and maintain blades, which contributes to the longevity and performance of the mower.

Overall, the Scag Power Equipment STHM line represents a commitment to quality and innovation, delivering powerful performance, user-friendly design, and advanced technology that appeals to both professionals and enthusiasts alike. Whether for residential or commercial use, the STHM offers everything needed for a precise and efficient mowing experience.
Top Page Image Contents