Infinity TSS-450 manual Operation, Maintenance and Service, Surround Modes, Final Positioning

Page 9

OPERATION

Surround Modes

When using the TSS-450 in a Dolby* Digital or DTS home theater system, make sure all speakers are set to “Small”. When using the system in a Dolby Pro Logic* home theater system, make sure the receiver’s center channel mode is set to “Normal”.

Some Dolby Digital-equipped receivers/processors offer different setup options for each source or surround mode, e.g., CD-stereo, videotape, Dolby Digital, Pro Logic. In each case, follow your equipment’s instructions to ensure that the subwoofer output is turned on and that the speakers are set to “Small” in each mode.

If your receiver has adjustable crossover settings, we recommend the subwoofer crossover be set between 100Hz – 120Hz.

Power On

Plug your subwoofer’s AC cord into a wall outlet. Do not use the outlets on the back of the receiver.

Initially set the Subwoofer Level Control

to the“MIN” position.

Turn on the subwoofer by pressing the Power Switch

on the

rear panel.

 

 

Turn on your entire audio system and start a CD or movie soundtrack at a moderate level.

Auto On/Stand-By

With the Power Switch in the AUTO position, the LED on the rear panel will remain lit in red or green to indicate the On/Stand-By mode of the subwoofer.

RED = STAND-BY (No signal detected, Amp Off)

GREEN = ON (Signal detected, Amp On)

The subwoofer will automatically enter the Stand-By mode after approximately 10 minutes when no signal is detected from your system. The subwoofer will then power ON instantly when a signal is detected. During periods of normal use, the Power Switch

can be left on. You may turn off the Power Switch

for extended

periods of nonoperation, e.g., when you are away on vacation.

Adjust Level

Turn the Subwoofer Level Control up about half way. If no sound emanates from the subwoofer, check the AC-line cord and input cables. Are the connectors on the cables making proper contact? Is the AC plug connected to a “live” receptacle? Has the Power Switch been pressed to the “On” position? Once you have confirmed that the subwoofer is active, proceed by playing a CD or DVD. Use a selection that has ample bass information.

Set the overall volume control of the receiver/processor to a

comfortable level. Adjust the Subwoofer Level Control

until

you obtain a pleasing blend of bass. Bass response should

not overpower the room but rather be adjusted so there is

a harmonious blend across the entire musical range. Many

users have a tendency to set the subwoofer volume too loud, adhering to the belief that a subwoofer is there to produce lots of bass. This is not entirely true. A subwoofer is there to enhance bass, extending the response of the entire system so the bass can be felt as well as heard. However, overall balance must

be maintained or the music will not sound natural. An experienced listener will set the volume of the subwoofer so its impact on bass response is always there but never obtrusive.

Final Positioning

After correctly connecting the TSS-450 system and verifying that both the subwoofer and all satellite speakers are playing, it is time to optimize the system for your particular listening room. Earlier, you placed the subwoofer in its general location. Finding the exact location for optimum performance sometimes only involves moving the speakers up to a few inches in any direction. We urge you, therefore, to experiment with placement, if possible, until your speakers deliver their full potential.

MAINTENANCE AND SERVICE

The satellite and subwoofer enclosures may be cleaned using a soft cloth to remove fingerprints or to wipe off dust.

All wiring connections should be inspected and cleaned or remade periodically. The frequency of maintenance depends on the metals involved in the connections, atmospheric conditions, and other factors, but once per year is the minimum.

If a problem occurs, make sure that all connections are properly made and clean. If a problem exists in one loudspeaker, reverse the connection wires to the left and right system. If the problem remains in the same speaker, then the fault is with the loud- speaker. If the problem appears in the opposite speaker, the cause is in another component or cable. In the event that your TSS-450 ever needs service, contact your local Infinity dealer or Infinity directly at 516-674-4INF (USA only) or www.infinitysystems.com for a service center near you.

TSS-450 6

Image 9
Contents Total Speaker Solutions Ii TSS-450 Read FirstTSS-450 Table of ContentsIntroduction Infinity Total SolutionsPlanning Your System Unpacking the SystemLeft and Right Front Channels PlacementCenter Channel Surround ChannelsConnect the black terminals in the same way Turn Off All Power SatellitesRear Panel Few Suggestions Subwoofer ControlsSubwoofer Connections Set line-level/LFE switch to LFEOperation Maintenance and ServiceSurround Modes Final PositioningSpecifications Powered SubwooferSatellites Center Channel TSS-450

TSS-450 specifications

The Infinity TSS-450 is a pioneering model in the realm of lawn care equipment, specifically designed for homeowners and professionals seeking efficiency and performance in maintaining their green spaces. This riding lawn mower boasts a powerful engine and a suite of innovative features that cater to the diverse needs of its users.

At the heart of the TSS-450 is a robust and reliable engine that delivers exceptional power, enabling it to handle a variety of terrains and grass types with ease. The mower's cutting system employs a dual-blade design, ensuring a clean and even cut across expansive lawns, while reducing the time taken to complete mowing tasks. This dual-blade technology enhances the mower's overall efficiency, allowing it to cover more ground in less time.

One of the standout features of the Infinity TSS-450 is its advanced hydrostatic transmission system. This technology facilitates smooth speed control without the need for manual gear shifting, allowing operators to navigate their lawns with precision and confidence. The ease of operation makes it suitable for users of all skill levels, from novice homeowners to seasoned landscaping professionals.

The TSS-450 is also equipped with an ergonomic seat and user-friendly dashboard for improved comfort and accessibility. The adjustable seat ensures that operators can find their preferred driving position, reducing fatigue during extended mowing sessions. The dashboard features easy-to-read gauges and controls, providing real-time information about the mower’s performance and allowing for effortless adjustments.

Another impressive characteristic of the Infinity TSS-450 is its versatility. With optional attachments such as baggers, mulchers, and plows, this mower can effortlessly transition from a lawn care tool to a multifunctional yard maintenance machine. This adaptability makes it an ideal choice for those who desire a single piece of equipment that can tackle various yard tasks throughout the year.

Finally, the durability of the Infinity TSS-450 cannot be understated. Constructed with high-quality materials and rigorously tested for performance, this mower is built to withstand the rigors of regular use. Combined with low maintenance requirements, the TSS-450 promises to be a dependable partner for maintaining lush, beautiful lawns for years to come.

In summary, the Infinity TSS-450 stands out as a powerful, efficient, and versatile lawn mower that marries innovation with practicality, making it a preferred choice for anyone serious about lawn care.