Infinity Model Twelve Connections, Set Normal/LFE Switch to LFE Set Normal/LFE Switch to Normal

Page 6

CONNECTIONS

If you have a Dolby* Digital or DTS® receiver/processor with a low-frequency-effects (LFE) output:

O SUBW OFER OR

LFE OUTPUT

If your receiver/processor has subwoofer outputs for the left and right channels:

On

Off

On

Off

 

Phase

 

Phase

LFE

Normal

LFE

Normal

 

Level

Level

inM

Max

Min Max

 

 

Crossover

 

Crossover

 

 

[Hz]

 

[Hz]

50

501

Green:On

50

150

 

 

 

Green:On

 

 

ed:SR

tandby

 

Red:Standby

odeM

l Twelve

FEL

ineL In

Model Twelve

LFE

 

 

 

Input

 

 

Input

Line In

 

 

 

ineL Out

 

 

Line Out

• Set Normal/LFE Switch to LFE.

NOTE: In this case, you do not need to use a Y connector. Simply connect the LFE output on your receiver/processor to either the left or right input on the subwoofer.

• Set Normal/LFE Switch to Normal.

NOTE: Some receivers have a single subwoofer output (do not confuse this with a single LFE output as described to the left). In that case, it is recommended that you use a Y connector (not included) to maximize performance.

The Cascade Model Twelve also includes a set of line outputs. These outputs allow you to “daisy-chain” one Model Twelve to multiple Model Twelve subwoofers. Simply connect the first subwoofer as described above and then run a subwoofer cable from the line output(s) to the line input(s) on the next sub.

NOTE:This line output is before the R.A.B.O.S. circuit. Each subwoofer’s R.A.B.O.S. controls must be individually adjusted during the R.A.B.O.S. setup.

SUBWOOFER OR

LFE OUTPUT

 

Green: On

 

Red: Standby

Model Twelve

 

LFE

Line In

Input

 

Line Out

OR

 

Green: On

 

Red: Standby

Model Twelve

 

LFE

Line In

Input

 

Line Out

 

Green: On

 

Red: Standby

Model Twelve

 

LFE

Line In

Input

 

Line Out

 

Green: On

 

Red: Standby

Model Twelve

 

LFE

Line In

Input

 

Line Out

3 Cascade Model Twelve

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Twelve Upon completion of any service or repairs Read FirstIi Cascade Model Twelve Table of Contents Unpacking the Subwoofer PlacementInfinity Cascade Model Twelve Cascade Model TwelveControls and Connections Rear PanelSet Normal/LFE Switch to LFE Set Normal/LFE Switch to Normal ConnectionsPower On OperationR.A.B.O.S. Goal R.A.B.O.S. Kit Includes Following ComponentsWhat R.A.B.O.S. Does Performing R.A.B.O.S.TestsContents of the R.A.B.O.S. Test CD Rslm PlacementTurn the system volume to minimum Initial System-Level SettingSetting the Subwoofer Test Level When you have completed this adjustment, press PauseLocating a test point Frequency What Does a Parametric Equalizer Do?Completing the Measurement Template WidthUsing the Width Selector Placement of the Bandwidth SelectorWhat You Measure, What to Do Skip to the Adjusting the R.A.B.O.S. Equalizersection onLevel Our example, you would enter 9 in the attenuation fieldExample 2. Two Response Peaks Example 3. Peak Adjacent to a DipExample 4. Narrow Response Example of two narrow dipsAdjusting the R.A.B.O.S. Equalizer Example 6. Ideal ResponsePosition Final System Balance Cascade Model Twelve R.A.B.O.S. ControlsMaintenance and Service Frequency Frequency Specifications Cascade Model Twelve

Infinity Compact Powered Subwoofer, Model Twelve specifications

The Infinity Model Twelve is a compact powered subwoofer designed to elevate your audio experience with its remarkable sound quality and advanced technological features. This subwoofer is engineered to provide deep, rich bass that complements a variety of audio formats, making it an excellent choice for both home theater systems and music playback.

One of the standout features of the Infinity Model Twelve is its innovative design. The subwoofer is equipped with a high-performance 12-inch woofer that delivers powerful low-frequency response. This allows it to reproduce those deep bass notes that are often missing in standard speaker setups. The result is an immersive listening experience that brings movies and music to life.

Another key technology incorporated into the Model Twelve is its built-in Class D amplifier. This amplification technology not only provides sufficient power to the subwoofer without the bulk of traditional amplifiers but also ensures energy efficiency. The Class D amplifier maximizes performance while minimizing heat generation and power consumption, making it an eco-friendly option.

The subwoofer also features an adjustable crossover frequency, allowing users to customize the integration of bass with their existing speaker system. This flexibility ensures that the Model Twelve adapts seamlessly to different audio setups, enhancing the overall sound quality while catering to individual preferences.

Moreover, the Infinity Model Twelve includes phase control and volume adjustment features. These controls make it easy to fine-tune the subwoofer's output to achieve the perfect balance within your home audio environment. Whether you're watching an action-packed movie or listening to intricate musical arrangements, these adjustments help optimize playback.

In terms of build quality, the Infinity Model Twelve features a robust and stylish enclosure that not only looks great in any space but also minimizes resonance, ensuring clean and distortion-free audio. Its compact size makes it easy to integrate into smaller living areas without sacrificing performance.

In conclusion, the Infinity Model Twelve is a feature-rich compact powered subwoofer that excels in providing high-quality bass response. With its advanced technologies, user-friendly controls, and stylish design, it stands out as a strong contender for anyone looking to enhance their audio experience. Whether for home theater or music enjoyment, the Infinity Model Twelve delivers performance and versatility that is hard to beat.
Top Page Image Contents