4.Attach the CB to the mounting bracket using the rubber washers and mounting knobs.
Illustration
Mounting Knobs (2)
Rubber Washers (2)
To disconnect the microphone, unscrew the locking nut and gently pull out the microphone plug.
Caution: Never pull on the microphone cable.
CONNECTING THE
MICROPHONE
1.Align the slot on top of the micro- phone’s plug with the ridge inside the MIC jack. Then fully insert the plug into the jack.
Illustration
2.Turn the plug’s locking nut clockwise to tighten it.
3.Slide the microphone onto the microphone holder.
Illustration
6
INSTALLING AN
ANTENNA
Caution: To prevent damage to your CB, you must connect an antenna to it before you operate it.
Selecting an Antenna
When deciding on an antenna and its lo- cation, consider these points:
•The location of the antenna should be as high as possible.
•The antenna and antenna cable should be as far as possible from sources of electrical noise (ignition systems, gauges, and so on).
Your local RadioShack store sells a vari- ety of CB antennas for both mobile and