ILLUSTRATED PARTS LIST
CURVED SHAFT CS-16
Part Number | Model Used On | Quantity | Description |
10000 | 1 | Decal for pipe | |
10002 | 1 | Label | |
10006 | 1 | Owner's manual | |
10014 | 1 | Nose cone A | |
10015 | 1 | Nose cone B | |
10016 | 2 | Nose cone screw | |
10017 | 1 | Engine clamp assy. | |
10032 | 1 | Single type lever | |
10041 | 1 | Cable, throttle | |
10200 | 1 | Pipe assy | |
10210 | 1 | Cooling type flexible shaft | |
10211 | 1 | Two bearing head case | |
10212 | 1 | Protector assy | |
10220 | 1 | Blade to cut nylon code | |
10221 | 1 | Screw for the cutter | |
10222 | 1 | Tap and go with dia. 0.095" | |
10231 | 1 | Handle assy | |
10235 | 3 | Screw for loop handle | |
10236 | 3 | Nut for loop handle | |
10237 | 1 | Bolt for guard | |
10238 | 1 | Nut for guard | |
10239 | 1 | Washer for clamp bolt | |
ENGINE | 1 | 34cc |
WARNING: IT IS UNSAFE TO USE ANY AFTER MARKET HEAD, ATTACHMENT, ACCESSORY OR BLADE ON THIS UNIT. USE ONLY HEADS, ATTACHMENTS, BLADES AND ACCESSORIES MANUFACTURED BY SARLO AND INTENDED FOR THIS SPECIFIC MODEL.
9