Saunatec 1108-60, 1108-24, 1108-46 manual Operation, Turning system on

Page 6

Installation & Operation Instructions

6

 

 

SECTION 7: OPERATION

For health and fire safety, never attempt to alter or bypass the controls. This heater has a 60 minutes timer built into the programming. The rock temperature is preset by the manufacture.

Turning system on:

Position the O - I (On/Off) rocker switch on the lower front of heater to the “Up” position. This switch can remain in the “I or On” position indefinitely. The “I” position puts the hand held control in the standby mode.

Control button names are listed in Diagram 4.

Initializing System: Press the “Reset” two or three times to cycle the control until the “0” is the only thing glowing in the Boost Power Time Indicator Lights. This means that the “Boost Power” is set for “0” min- utes and the “Continuous Power” is “Off”. Press the “Reset” button again and the control will be in the Standby mode.

To activate “Continuous Power” press the Continuous Power Arrow “>” on lower half of control. Pressing this button will cycle through the Continuous Power settings from 100 Watts to 200 Watts and then to 300 Watts. Press the button again and it will turn them off.

Diagram 4

A

B

DC

F

EG

H

I

Reset

ABoost Power On Lights

BBoost Power Time Indicator Lights

CIncrease Boost Power Time Arrow

DDecrease Boost Power Time Arrow

E100 Watt Indicator Light

F200 Watt Indicator Light

G300 Watt Indicator Light

HContinuous Power Arrow

IReset Button

The “Continuous Power” is used to replenish the rock temperatures during non sauna use. The lid should be closed and the heater would use the chosen Continuous Power setting to heat the rocks to normal operating temperature and the internal thermostat would regulate the temperature. The higher the Continuous Power setting, the quicker the rocks would regain temperature and be ready to be used again. Refer to “Tips” in Section 6 for more information.

To activate the “Boost Power” press the arrow keys at the top of control to activate the Boost Power timer. As the arrow “>” key is pressed the time will increase to a maximum of 60 minutes. Press the “<” arrow key and the time will decrease until 0 minutes.

To activate the “Closed Lid Power” press the “<“ arrow key at the top of the control until the green light is glowing. This mode will reduce maximum power to continuous power after 3 to 10 minutes when the lid is closed. When the lid is open, the maximum power will turn back on after 3 to 10 minutes.

The “Boost Power or Closed Lid Power” provide maximum power to the rocks with a maximum time of 60 minutes.

Note: No control functions will be glowing in the Standby mode.

4211-86-G 09-23-05

314 SKLH 20C

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation & Operation Instructions General InformationDiagram 1E Diagram Diagram 1A Diagram 1DDiagram 1B Diagram 1CElectrical HOOK-UP Mounting Sauna Heater and ControlPlacing of Rocks Guard RailFirst time use or with rocks cold Safety Locking LidTheory of Operation Normal UseTheory of Operation Sauna Temperature and Humidity Theory Example Room temperature is 145 F 200 145 =Operation Turning system onInstallation & Operation Instructions Installation & Operation Instructions Installation & Operation Instructions Exhaust Fresh Air Room Construction High Limit Control Reset Button HOW to Take a SaunaMaintenance TroubleshootingVentilation

1108-46, 1108-24, 1108-60 specifications

Saunatec has established itself as a leader in the sauna industry, and its models 1108-46, 1108-60, and 1108-24 are exemplary representatives of their innovative approach to sauna design. These models showcase a blend of traditional aesthetics with modern technology, making them perfect for both commercial and residential settings.

The Saunatec 1108-46 model is particularly celebrated for its spacious design, accommodating up to six people comfortably. This unit features an elegant wooden interior, crafted from high-quality cedar, known for its resistance to moisture and pleasant aroma. The large glass front allows for ample natural light, creating an inviting atmosphere. Equipped with advanced heating technology, the 1108-46 offers swift and efficient heating, ensuring a consistent temperature throughout the sauna experience.

In contrast, the Saunatec 1108-60 model is designed for those seeking a larger sauna experience. This model can comfortably fit up to eight individuals, making it an ideal choice for families or social gatherings. Its dual-level bench design maximizes seating while enhancing airflow and heat distribution. One of the standout features of the 1108-60 is its digital control panel, enabling users to customize their experience with precise control over temperature and lighting options. Additionally, the integrated sound system allows users to enjoy their favorite music or podcasts while they relax.

The Saunatec 1108-24, on the other hand, is a compact sauna solution perfect for smaller spaces or more intimate settings. Despite its size, it does not compromise on the sauna experience. The 1108-24 can accommodate up to four people and is designed with efficiency in mind. Its energy-efficient heating elements ensure that users can enjoy the therapeutic benefits of sauna bathing without incurring high energy costs. The model also includes built-in mood lighting, creating a serene environment ideal for relaxation.

All three models utilize Saunatec's patented heating technology, which not only provides faster heating times but also maintains consistent temperatures, offering users a safe and enjoyable experience. The durability and quality of materials used in these saunas ensure longevity, making them a worthwhile investment for anyone looking to enhance their wellness routine. With their thoughtful design and advanced features, the Saunatec 1108 series stands out in the modern sauna market.
Top Page Image Contents