Rover 302T3 warranty Blade removal, Blade fitting- refer figure

Page 7
Figure 5. Blade fasteners
Cleaning
To prevent the build up of grass under the deck and to maintain the appearance of the mower it should be cleaned at the end of each days mowing.
∙ Stop the engine and remove the spark plug lead when the blade has stopped ∙ Remove the grass catcher and tilt the mower back on it’s handle bars
∙ Hose the underside of the mower housing to remove all grass build up
∙ Lower the mower to the ground and fit the spark plug lead to the spark plug
∙ Hose the grass catcher inside and out to remove all grass debris and hang up to dry before storage
CAUTION
Do not hose the engine as water can damage the air cleaner and ignition system
7
refer figure 4

Blade removal-

∙Remove the spark plug lead from the spark plug

∙Set the mower to the high cut position

∙Lift the rear flap and prop open to give access to the blades.

∙Remove the blade retaining nuts, bolts, blades, washers and discard.

Blade fitting- refer figure 4

∙Remove the spark lead from the spark plug

∙Set the mower to the high cut position

∙Lift the rear flap and prop open to give access to the blades.

∙Fit the new blades, blade bolts, washers and nuts in sets to maintain balance. Refer to figure 5 for correct order.

∙Tighten the blade nuts to 16 Nm. Check that the blades are free to move when the blade nut is tightened

∙Remove the flap prop and replace the spark plug lead

Figure 4. Blade change

 

Nyloc nut

 

Backing plate

Disc

 

Tension washer

 

Blade

Blade bolt

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Easy Trim Damaged Blades and Worn Bolts are Major Hazards Safety InstructionsCarton Contents Manual ContentsIntroduction Handle bar assembly- refer figure Setting UPGrass catcher assembly- refer figure Removing the grass catcher Installing the grass catcherAdjusting the height of cut- refer figure OperationStopping the engine MaintenanceEngine air cleaner Starting the engineBlade fitting- refer figure Blade removalAustralia & New Zealand Only Warranty Conditions

302T3 specifications

The Rover 302T3 is a remarkable vehicle that showcases the brand’s commitment to innovation and performance. This model, part of Rover’s esteemed lineup, seamlessly combines advanced technology with timeless design, catering to both enthusiasts and everyday drivers alike.

One of the most notable features of the Rover 302T3 is its powerful engine. Equipped with a turbocharged inline-four engine, it produces an impressive output, ensuring robust performance and efficiency. This engine is paired with a smooth-shifting, six-speed automatic transmission that enhances driving dynamics, providing both spirited acceleration and commendable fuel economy.

The Rover 302T3 boasts a modernized chassis that contributes to a refined driving experience. With its lightweight aluminum construction, the vehicle strikes a perfect balance between agility and stability. The independent suspension system provides excellent cornering capabilities, while the integrated dynamic stability control ensures driver confidence in various road conditions.

Inside, the Rover 302T3 is designed with luxury and comfort in mind. The spacious cabin features high-quality materials, with premium leather upholstery and soft-touch surfaces that create an inviting atmosphere. Advanced infotainment features, including a high-resolution touchscreen display, smartphone integration, and a premium audio system, elevate the driving experience, keeping occupants connected and entertained.

Safety is a paramount concern for Rover, and the 302T3 exemplifies this commitment. This model is equipped with an array of advanced safety features, including adaptive cruise control, lane-keeping assist, and automatic emergency braking. These technologies work together to enhance driver awareness and mitigate potential accidents.

The Rover 302T3 also embraces eco-friendly technologies, featuring an efficient hybrid variant that significantly reduces emissions while maintaining performance. This focus on sustainability aligns with global trends towards greener transportation solutions, making the Rover 302T3 an appealing choice for the environmentally-conscious consumer.

In conclusion, the Rover 302T3 stands out in its segment due to its blend of powerful performance, luxury features, and advanced safety technologies. It is a vehicle designed for those who value both driving pleasure and modern conveniences, making it a noteworthy contender in the competitive automotive market. As Rover continues to push the boundaries of innovation, the 302T3 exemplifies the brand's dedication to excellence in design and functionality.
Top Page Image Contents