RedMax CHTZ2400 manual  14 , Recommended Mixing Ratio Gasoline 50OIL, HOW to MIX Fuel

Page 14

6. Fuel

WARNING

•Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m (10ft) away from the fueling point before starting the engine.

•The RedMax engines are lubricated by oil specially formulated for air-cooled 2-cycle gasoline engine use. If RedMax oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use. (JASO FC GRADE OIL or ISO EGC GRADE)

•Do not use BIA or TCW (2-stroke water- cooling type) mixed oil.

14

■RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1

50:1 MIXING CHART

GASOLINE gal. 1 2 3 4 5

2-CYCLE OIL fl.oz 2.6 5.2 7.8 10.4 13

GASOLINE liter 1

2

3

4

5

2-CYCLE OIL ml 20 40 60 80 100

•Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.

•These engines are certified to operate on unleaded gasoline.

•Make sure to use gasoline with a minimum octane number of 89 RON (USA/Canada: 87AL)

•If you use a gasoline of a lower octane value than prescribed, there is a danger that the engine temperature may rise and an engine problem such as piston seizing may consequently occur.

•Unleaded gasoline is recommended to reduce the contamination of the air for the sake of your health and the environment.

•Poor quality gasolines or oils may damage sealing rings, fuel lines or fuel tank of the engine.

■HOW TO MIX FUEL

IMPORTANT

Pay attention to agitation.

1.Measure out the quantities of gasoline and oil to be mixed.

2.Put some of the gasoline into a clean, approved fuel container.

3.Pour in all of the oil and agitate well.

4.Pour In the rest of gasoline and agitate

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HTZ2400 CHTZ2400 Page Safety First ContentsParts location  4 Specifications  5 Wear head, eye and ear protection  6 Symbols on the machine  7 Working Circumstance For safe operationWorking Condition  8 Working Plan  9  10  Before Starting the EngineStarting the Engine Using the Product  11  12  MaintenanceIf Someone Comes  13  Handling FuelTransportation  14  HOW to MIX FuelFuel Recommended Mixing Ratio Gasoline 50OILFueling the Unit For Your Engine LIFE, AvoidOP4 OperationOP1 Starting EngineStopping Engine OP3 Adjusting Idling SpeedOP6 Running in the Engine 18  HOW to USEOP7 OP8  19  OP9Hedge Trimming Techniques  20  MaintenanceMaintenance Chart  21   22  MA4 MufflerIntake AIR Cooling Vent  23  Check Probable Causes Action Troubleshooting guideStorage  24 Parts list  25 Cutting Unit HTZ2400 S/N HTZ2400-L S/N  26  27  Blade ASS’YCutting Unit CHTZ2400 S/N CHTZ2400-L S/N  28 CHTZ2400-L  29 Engine Unit HTZ2400/CHTZ2400 HTZ2400-L/CHTZ2400-L S/N  30  31  InsulatorManufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée Page Komatsu Zenoah America INC

CHTZ2400, HTZ2400 specifications

The RedMax HTZ2400 and CHTZ2400 are premier brush cutters designed to tackle demanding outdoor tasks with ease and efficiency. These robust machines are ideal for both professional landscapers and dedicated enthusiasts, delivering impressive power and maneuverability.

One of the standout features of the HTZ2400 and CHTZ2400 is their advanced engine technology. Equipped with a powerful 23.6 cc two-stroke engine, these brush cutters offer outstanding cutting performance with reduced emissions, supporting eco-friendly gardening practices. The engines are designed to provide high torque even at lower RPMs, ensuring efficient fuel consumption while maintaining optimal cutting speed.

The ergonomic design of the HTZ2400 and CHTZ2400 ensures comfort during prolonged use. The machines feature adjustable handles, allowing users to customize the grip to their preference. This adaptability not only enhances comfort but also improves control, making it easier to navigate around obstacles such as trees and shrubs while minimizing operator fatigue.

A key characteristic of these brush cutters is their cutting versatility. The HTZ2400 is equipped with a semi-automatic trimmer head, which allows for easy line replacement, ensuring that you spend less time on maintenance and more time getting the job done. The CHTZ2400, on the other hand, features a heavy-duty blade for tackling tougher vegetation, making it perfect for larger and more challenging areas.

Both models incorporate anti-vibration technology, which significantly reduces operator fatigue during extended periods of use. This feature is particularly beneficial for professional landscapers who rely on their equipment for daily operations. Additionally, an easy-start system simplifies the ignition process, allowing for quick and convenient startup every time.

The durable construction of the HTZ2400 and CHTZ2400 guarantees long-lasting performance. Built to withstand the rigors of heavy-duty use, these brush cutters boast high-quality components that resist wear and tear. This durability is complemented by a lightweight design, making these machines easy to transport and handle.

In summary, the RedMax HTZ2400 and CHTZ2400 brush cutters are engineered for both power and performance. With their cutting-edge technology, ergonomic features, and versatility, these machines are an excellent choice for achieving professional results in landscaping and vegetation management. Whether trimming grass, clearing brush, or tackling dense foliage, the HTZ2400 and CHTZ2400 deliver exceptional results. Investing in these quality brush cutters ensures that users are well-equipped for any outdoor challenge they may face.
Top Page Image Contents