RedMax CHT2300L, HT2300A, CHT2300B manual Maintenance

Page 14

Maintenance

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the hedge-trimmer. Contact with moving cutting head or hot muffler may result in a personal injury.

■DAILY INSPECTION

•Check all the fasteners for loose or missing ones.

•Brush off dirt on the blades and apply a light coating of oil.

NOTE

•The blades are loose-installed to the guide bar with several screws and nuts. Do not tighten up those screws, or the blades will be locked and result in clutch failures. Allow the screws a half spare turn, and secure there with the nut(See NOTE on page 8).

■GEAR CASE

•At every 25 hours of use, supply grease to the gear case. Pump in grease via the grease fitting until it comes out of the root of blades.

■AIR FILTER

•The air filter, if clogged, will reduce the engine performance. Monthly check and clean the filter element in warm, soapy water as required. Dry completely before installing. If the element is broken or shrunk, replace with a new one.

■FUEL FILTER

•When the engine runs short of fuel supply, check the fuel cap and the fuel filter for blockage.

■SPARK PLUG

•Starting failure and mis-firing are often caused by a fouled spark plug. Periodically clean the spark plug and check that the spark gap is in the correct range. For a replacement plug, use the correct type specified by RedMax(See SPECIFI- CATIONS on the page 15).

•REPLACEMENT PLUG IS A CHAMPION RCJ6Y OR THE EQUIVALENT, SUCH AS BOSCH WR8E OR NGK BR6S.

IMPORTANT

•Note that using any spark plugs other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and damaged.

•To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Owner / Operator Manual Safety First Contents Safety Precautions  2 Work Gear and Clothing Things to Check Before Starting UP the Engine Things to Check Before Using Your HEDGE-TRIMMERAvoid Noise Problem Things to be Careful about When Using Your HEDGE-TRIMMER  6  Set up HT2300A/HT2300L 8  Recommended Mixing Ratio Gasoline 32OIL HOW to MIX FuelFuel Fueling the UnitStopping Engine OperationStarting Engine Warning Adjusting Idling Speed HOW to USEMaintenance Intake AIR Cooling Vent Warning MufflerSpark Arrester Procedures to be Performed After Every 100 Hours of USE StorageSpecifications HT2300A HT2300L 16  Parts List  18   19   20   21   22   23   24   25  Manufacturers Warranty Coverage RedMax 2-YEAR Limited Warranty RedMax Garantie limitée à 2 ans Emission Control Label Engine Family 1KZXS CD EMKomatsu Zenoah America INC

HT2300A, CHT2300L, HT2300L, CHT2300B specifications

RedMax has established itself as a reliable brand in the outdoor power equipment market, delivering robust tools for landscaping and maintenance. Among their product lineup, the RedMax CHT2300B, HT2300L, CHT2300L, and HT2300A models stand out for their performance, versatility, and user-friendly design, making them popular choices for both professionals and homeowners.

The RedMax CHT2300B is a powerful hedgetrimmer equipped with a 21.7cc 2-stroke engine, delivering ample power for tackling dense hedges and shrubs. Its dual-action blades provide smooth cuts, reducing vibrations and enhancing precision. The ergonomically designed handle improves comfort, allowing for extended use without fatigue. The CHT2300B also features an adjustable cutting angle, enabling users to reach hard-to-access areas and create intricate shapes.

In contrast, the HT2300L model is a pole saw designed specifically for high branches and overhead trimming. With a lightweight yet sturdy design, it features a 1.3 kW engine that ensures reliable performance even in tough conditions. The telescopic pole extends up to 3.5 meters, allowing users to reach significant heights without the need for ladders. The HT2300L is equipped with a sharp, durable cutting head that swiftly handles branches up to 25mm thick, making it perfect for professional landscapers and garden enthusiasts alike.

The CHT2300L shares many similarities with the CHT2300B but adds a few enhancements. With its longer blade length, it offers improved reach and efficiency when trimming expansive hedges. This model boasts a powerful 21.7cc engine, emphasizing RedMax's commitment to performance and reliability. The lightweight design, combined with an anti-vibration system, ensures operator comfort, making extensive trimming tasks manageable.

Finally, the HT2300A model is another remarkable addition to RedMax’s line of pole saws. It combines a high-performance engine with innovative technology to deliver high cutting speeds. The adjustable angle head allows for precise cuts, and its durable design ensures longevity even under frequent use. The HT2300A is also engineered for ease of use, with a simple start system and controls positioned for intuitive operation.

In summary, the RedMax CHT2300B, HT2300L, CHT2300L, and HT2300A models are exemplary tools that showcase the brand's dedication to quality and innovation. Whether you're a professional landscaper or a DIY gardener, these machines offer the performance, durability, and user-friendliness needed to keep your outdoor spaces looking their best.
Top Page Image Contents