Optional vacuum kit usage (Preparing for use)
Attach the adequate accessories, respectively for blower operation and
NOTE
•Use the gloves during operation.
•In adjustment of the blower/dust collector or in other types of operation, be sure to stop the engine and detach the spark plug cap.
•Never start operation unless this machine is completely assembled.
■MOUNTING THE DUST-COLLECTING KIT
1)
1.Fit the extension pipe (1) groove with main unit port projection, turn to mount the pipe to the main unit.
2.Tighten the clamp screw (2) securely.
2)Installing Vacuum pipe (nozzle)
1.Loosen the screw (3), and open the suction port cover.
2.Align the 
(5) indicated on the vacuum
pipe (4) with the 
indicated on the blower. Then insert the vacuum pipe (4) into the
blower.
3.Turn the vacuum pipe (4) until the 
(5) is
aligned with the 
indicated on the blower to lock the vacuum pipe.
IMPORTANT
Hold the bottom of the vacuum pipe when turning the vacuum pipe to install or remove it.
3)Installing Elbow and Dust Bag
1.Open the fastener of the dust bag.
2.Insert the elbow convex groove into the dust bag elbow opening.
Continue to push the elbow convex groove until the convex hits against the dust bag opening.
Close the dust bag fastener.
3.Fit the elbow groove with discharge port projection, turn the elbow and mount the dust bag to the main unit.