RedMax BC3401DL, BC4401DW manual  14 , Adjusting the Line Length

Operation

growth. The rate of cutting motion will depend on the material being cut. Heavy growth will require slower action than will light growth.

5.Never swing the unit so hard as you are in danger of losing your balance or control of the unit.

6.Try to control the cutting motion with the hip rather than placing the full workload on the arm and hands.

7.Take precautions to avoid wire, grass and dead, dry, long-stem weeds from wrapping around the head shaft. Such materials can stall the head and cause the clutch to slip, resulting in damage to the clutch system if repeated frequently.

ADJUSTING THE LINE LENGTH

•Your brushcutters is equipped with a semi- auto type nylon line head that allows the operator to advance the line without stopping the engine. When the line becomes short, lightly tap the head on the ground while running the engine at full throttle.

•Each time the head is bumped, the line advance about 1 inch(25.4 mm). For better effect, tap the head on bear ground or hard soil. Avoid bumping in thick, tall grass as the engine may stall by overload.

14 