SAFETY INSTRUCTIONS
Personal protective equipment
WARNING: Whenever you use a clearing saw, brushcutter or trimmer you must wear personal protective equipment that is approved by the authorities. Personal protective equipment does not eliminate the risk of accidents, but it can reduce the ef- fects of an injury in the event of an accident. Ask your dealer for help when choosing protective equipment.
IMPORTANT! Listen for warning signals or shouts when you are wearing hearing protection. Always remove your hearing protection as soon as the engine stops.
GLOVES
Gloves should be worn when necessary, e.g., when fitting cutting attachments.
HEARING PROTECTION
Wear hearing protection that provides adequate noise reduction.
EYE PROTECTION
Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with standard ANSI Z87.1.
BOOTS
Wear sturdy,
CLOTHING
Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewelry, shorts sandals or go barefoot. Secure hair so it is above shoulder level.
115391427 Rev. 4 5/15/12
FIRST AID KIT
Always have a first aid kit nearby.
Machine’s safety equipment
This section describes the machine’s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the “Know your trimmer ” section to locate where this equip- ment is positioned on your machine.
The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest ser- vicing dealer.
WARNING: Never use a machine that has faulty safety equipment! Carry out the inspection, mainte- nance and service routines listed in this section. If your machine fails any of these checks, contact your service agent to get it repaired.
Stop switch
Make sure the engine stops when you push and hold the stop switch.
Cutting attachment guard
This guard is intended to prevent loose ob- jects from being thrown towards the opera- tor. The guard also protects the operator from accidental contact with the cutting at- tachment.
WARNING: Never use a cutting attachment without an approved guard. See the section on “Technical data”. If an incorrect or faulty guard is fitted this can cause serious personal injury.