RedMax EB4401 manual Storage, Shoulder Strap, Before Storing the Blower

Page 16

Maintenance

SHOULDER STRAP

If the shoulder strap is damaged it may break during use, thus causing the product to fall and resulting in personal injury. Follow the instructions below to replace the shoulder strap.

Pass the upper end of the strap through the hanger, making the FLAPPED SIDE OUTSIDE.

Put the end of the strap through the ring on the strap, and then push the ring toward the hanger as close as possible.

WARNING

The flap on the end of the strap works as a stopper. Never install the strap with the flapped side inside, or the unit may fall from the operator, which could result in injury to the operator and/or damage to the unit.

Storage

BEFORE STORING THE BLOWER:

1.Drain a fuel tank and push the primer bulb until it becomes empty of fuel.

2.Remove the spark plug and drop a spoonful of 2-cycle oil into the cylider. Crank the engine several time and replace the plug.

16

Image 16
Contents EB4401 Safety First Contents Operator Safety PrecautionsUSE of Blower Fuel Working ConditionAvoid Noise Problem Avoid Chances of Damage 7  Symbols on the machine Important Engine InformationParts Location & Specifications AssemblyModel EB4401 Blower TubesFuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL Fueling the Unit For Your Engine LIFE, AvoidControl ARM OperationStarting Engine Important Adjusting Idle Speed Stopping EngineMaintenance AIR CleanerReplacement Plug is a Champion RJ6C Fuel FilterSpark Arrester MufflerAIR Inlet NET Important Shoulder Strap StorageBefore Storing the Blower Parts List Parts List EB4401 EB4401  20   21   22   23  Manufacturer’s warranty coverage Limited Warranty RedMax Garantie limitée