RedMax G310TS manual Operation, OP1 OP2 OP3 OP4 OP5 Fueling the Unit OP1, Starting Engine

Page 11

7. Operation

OP1

OP2

OP3

OP4

OP5

■FUELING THE UNIT (OP1)

1.Remove the fuel tank cap and pour fuel into the tank up to 80% of full capacity.

2.Fasten the fuel cap securely and wipe up any fuel spillage around the unit.

3.Remove the oil tank cap and pour chain oil into the tank. Fasten the cap securely.

WARNING

1.Select bare ground for fueling.

2.Move at least 10 feet (3 meters) away from the fueling point before starting the engine.

3.Stop the engine before refueling the unit.

■STARTING ENGINE

WARNING

Keep clear of the saw chain as it will start rotating upon starting of the engine.

1.Put the ignition switch to “ I ” position. (OP2)

2.While holding the throttle lever together with the throttle interlock, push in the side button and release the throttle lever to hold it at the start position. (OP3)

3.Pull out the choke knob to the closed position. (OP4)

NOTE

When restarting immediately after stopping the engine, Ieave the choke knob at the open position.

4.While holding the saw unit securely on the ground, pull the starter rope vigorously. (OP5)

WARNING

Do not start the engine while hanging the chain saw with a hand. The saw chain may touch your body. It's very dangerous.

5.When engine has ignited first, push in the choke knob and pull the rope again to start the engine.

6.Allow the engine to warm up with the throttle lever pulled slightly.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 2875-93111005 G310TSPage Contents Safety FirstParts location SpecificationsG310TS Power unit Engine Family TKZ030UB24RA Symbols on the machineEngine Displacement 30.1cc Important Engine InformationFor safe operation Kickback Safety Precautions for Chain SAW Users SE1 SE2 SE3 SE4 SE5 Installing guide bar and saw chainRecommended Mixing Ratio Gasoline 32 OIL HOW to MIX FuelFuel and chain oil FuelChain OIL Starting Engine OperationOP1 OP2 OP3 OP4 OP5 Fueling the Unit OP1 Stopping Engine Adjusting CarburetorOP6 OP7 OP8 Checking OIL SupplyReleasing the Brake OP9Chain Brake Guard Against Kickback SawingLogging and Limbing SA1 SA2Felling a Tree SA2 Cutting a pillowed log SA3 SA4 SA5 SA6Cutting an unpillowed log MA1 MA2 MA3 MA4 MaintenanceDaily Maintenance SAW Chain Oregon Chain MA5 MA6 MA7 MA8Guide BAR Oregon BARSpark Plug Monthly Maintenance Fuel FilterMA9 OIL StrainerSpark Arrester StorageMA13 Parts list G310TS 23   24   25  Manufacturers Warranty Coverage RedMax Chainsaw Model G310TS Year Limited WarrantyIl nexiste aucune autre garantie explicite RedMax Chainsaw Modèle G310TS Garantie limitée à 1 ans

G310TS specifications

The RedMax G310TS is a highly versatile and efficient gas-powered string trimmer that comes equipped with advanced features to meet the needs of both professional landscapers and enthusiastic gardeners. Known for its exceptional performance and ease of use, the G310TS is designed to tackle various tasks from trimming grass along edges to maintaining larger lawns and gardens.

One of the standout characteristics of the G310TS is its powerful 30.5 cc engine, which delivers a robust performance while maintaining fuel efficiency. This lightweight engine allows for extended use without causing undue fatigue to the operator. The unit is designed with an ergonomic handle that provides comfort during prolonged use, enhancing user experience significantly.

The G310TS incorporates a straight shaft design, which offers the advantage of reaching difficult areas such as under bushes or around fences. This design not only improves maneuverability but also allows for better line of sight, helping users to achieve a cleaner cut. Additionally, the trimmer is equipped with a dual line head that provides efficient cutting capabilities, allowing operators to trim larger sections of grass in less time.

The RedMax G310TS features advanced technologies that enhance its usability and performance. The Easy Start system is designed to reduce the effort required to start the engine, making it particularly useful for those new to using power equipment or for long workdays. Furthermore, the trimmer’s anti-vibration system minimizes fatigue and strain on the hands and arms, allowing for greater comfort during operation.

Another key feature is the adjustable cutting height, which enables users to customize their trimming tasks according to the type of vegetation being cut. The durable construction of the G310TS ensures longevity, with high-quality materials that can withstand the rigors of professional use.

In summary, the RedMax G310TS combines power, efficiency, and user-friendly design, making it an ideal choice for anyone needing a reliable and effective string trimmer. With its robust engine, ergonomic features, and advanced technologies, it is well-suited for a wide range of landscaping tasks, ensuring that users can achieve professional results in their lawn care endeavors. Whether you are a seasoned professional or a weekend warrior, the G310TS is engineered to deliver excellent performance and operational ease.
Top Page Image Contents