RedMax G3100T manual MA5 MA6 MA7 MA8, Guide BAR, Oregon BAR, Oregon Chain, AIR Filter, Oiling Port

9. Maintenance

MA5

MA6

MA7

MA8

18 

GUIDE BAR

1.Remove sawdust in the bar groove and the oiling port. (MA5)

2.Grease the nose sprocket from the feeding port on the tip of the guide bar. (MA6)

3.Periodically turn over the guide bar when mounting it to the unit, in order to prevent partial wear.

WARNING

This saw is equipped with one of the following low kickback bar/chain combinations:

	RedMax Part Number
Bar Size	Guide Bar	Saw Chain
14 (inch)	G0011	91SG52X
(35cm)

For replacement, use only above bar and chain, or the following;

OREGON BAR

14 inch S/N DOUBLE GUARD BAR, Mount code #A041.

OREGON CHAIN

91SG

AIR FILTER

A clogged air filter can reduce the engine performance. Daily check the filter elements and tap off attached saw dust. When cleaning, use warm, soapy water and dry completely before installing. When the element is broken or shrunk, replace with a new one. (MA7)

OILING PORT

Dismount the guide bar and check the oiling port for blocking by sawdust. (MA8)

GENERAL

Inspect the entire unit for fuel leakage, Ioose fastenings, and damage to major parts, especially handle joints and guide bar mounting. When