RedMax HE2601 manual  5 , Things to be Careful about When Using Your Stick Edger

Page 7

Safety Precautions

THINGS TO BE CAREFUL ABOUT WHEN USING YOUR STICK EDGER

When using your stick edger, grip the handles of the stick edger firmly with both hands, place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady, even posture while working.

Maintain the speed of the engine at the level required to perform edging work, and never raise the speed of the engine above the level necessary.

Always be sure never to allow other persons to come within the work area while edging.

Be especially careful not to slip if it is raining or if rain has just stopped, as the ground is likely to be slippery at such times.

Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Establish a safe method for gaining your attention during operation. Be careful if you are approached.

If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around.

Keep operation area clear of all persons, particularly small children and pets. Injury may result from flying debris.

Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an electrical shock.

Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is in operation or immediately after shutting down the engine. These metallic parts reach high temperatures during operation and doing so could result in serious burns.

When you finish edging in one location and wish to continue work in another spot, turn off the engine, and turn the stick edger so that the blades face away from your body before carrying it to the new location.

Never transport the stick edger over rough roads over long distances without first removing all fuel from the fuel tank, as doing so might cause fuel to leak from the tank as a result of shocks absorbed during transport.

Never operate the stick edger without the blade guard in place.

Do not use the stick edger for any job that is not recommended by the manufacturer.

Should the stick edger start to vibrate abnormally, stop the engine immediately and check the blade and other parts for the cause.

Avoid using the stick edger near rocks, gravel, stones and similar material that could be scattered and cause risk of injury or serious damage.

Use the stick edger only in daylight or good artificial light.

Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.

5

Image 7
Contents HE2601 Safety First Contents  2  Safety PrecautionsWork Gear and Clothing  3 Things to Check Before Starting UP the Engine Things to Check Before Using Your Stick EdgerAvoid Noise Problem  4  5  Things to be Careful about When Using Your Stick Edger 6   7  Set up 8  Fuel 9  Adjusting Handle PositionAdjusting Wheel Height Operation 10  Adjusting Idling SpeedStopping Engine  11  How to useRegular Maintenance Inspection Maintenance 12   13  Intake AIR Cooling Vent Warning Procedures to be Performed After Every 100 Hours of USE 14  Gear Case 15  Storage 16  Specifications 17   18  Drive Unit HE2601 S/N 000000 and up 19   20  Engine Unit HE2601 S/N 900101 and up 21  Manufacturer’s warranty coverage Remedy Model HE2601 Year Limited WarrantyKomatsu Zenoah America INC

HE2601 specifications

The RedMax HE2601 is a powerful and efficient handheld blower designed for both professional landscapers and homeowners seeking a reliable tool for maintaining their outdoor spaces. This model stands out for its combination of advanced technology, ease of use, and robust performance, making it an ideal choice for a variety of clearing tasks.

One of the standout features of the HE2601 is its impressive engine. It is equipped with a 25.4cc two-stroke engine that delivers exceptional power while maintaining fuel efficiency. This engine enables the blower to produce air speeds of up to 170 mph, ensuring that users can easily clear leaves, debris, and grass clippings from driveways, patios, and lawns. With its lightweight design, the HE2601 minimizes operator fatigue, allowing for extended use without discomfort.

Reducing operator fatigue is further enhanced by the blower's ergonomic design. The HE2601 features a soft-grip handle that provides a comfortable hold, while the well-balanced structure ensures easy maneuverability, enabling users to tackle various tasks effortlessly. Additionally, the blower's lightweight construction, weighing in at just 9.5 lbs, allows for excellent portability without sacrificing power.

The HE2601 also incorporates advanced technologies aimed at enhancing performance and ease of use. The easy-start, recoil system ensures that users can start the blower with minimal effort, even in challenging conditions. This feature is particularly beneficial for those who might struggle with traditional starting methods. Furthermore, the blower's adjustable air velocity function allows users to customize the airflow according to the specific clearing task, offering versatility for different applications.

Another notable characteristic of the RedMax HE2601 is its low noise output. Designed with noise reduction in mind, this blower operates quietly compared to many competing models. This makes it suitable for residential areas, where noise restrictions may apply, allowing users to maintain their yards without disturbing the neighbors.

In summary, the RedMax HE2601 combines power, comfort, and innovative technologies to create a reliable handheld blower. With its efficient engine, ergonomic design, user-friendly features, and reduced noise output, it is an excellent choice for anyone looking to efficiently maintain their outdoor spaces. Whether tackling autumn leaves or preparing a lawn for a summer gathering, the HE2601 is built to meet the demands of any outdoor cleaning job.