McCulloch MAC 316 XT Declaration of Conformity, Troubleshooting Table Cause Remedy, 404/07/1193

Page 14

CAUTION: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel fil- ter, fuel hose, or fuel tank during storage. Al-

cohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to fuel mixture separation and formation of acids during storage. Acidic gas can damage the engine.

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing all of the recommended remedies below except remedies that require operation of the unit.

TROUBLE

CAUSE

REMEDY

Engine will not

1.

Ignition switch off.

1. Move ignition switch to ON.

start or will run

2.

Engine flooded.

2. See “Difficult Starting” in

only a few

3.

Fuel tank empty.

Operation Section.

seconds after

3. Fill tank with correct fuel mixture.

starting.

4.

Spark plug not firing.

4. Install new spark plug.

 

5.

Fuel not reaching

5. Check for dirty fuel filter; replace.

 

 

carburetor.

Check for kinked or split fuel line;

 

 

 

repair or replace.

Engine will

1.

Idle speed requires

1. See “Carburetor Adjustment” in the

not idle

 

adjustment.

Service and Adjustments Section.

properly.

2.

Carburetor requires

2. Contact an authorized service dealer.

 

 

adjustment.

 

 

Engine will not

1.

Air filter dirty.

1. Clean or replace air filter.

accelerate,

2.

Spark plug fouled.

2. Clean or replace plug and regap.

lacks power,

3.

Chain brake engaged.

3. Disengage chain brake.

or dies under

4.

Carburetor requires

4. Contact an authorized service dealer.

a load.

 

adjustment.

 

 

 

 

 

 

 

Engine

1.

Too much oil mixed with

1. Empty fuel tank and refill with

smokes

 

gasoline.

correct fuel mixture.

excessively.

 

 

 

 

Chain moves

1. Idle speed requires

1. See “Carburetor Adjustment” in the

at idle speed.

 

adjustment.

Service and Adjustments Section.

 

2. Clutch requires repair.

2. Contact an authorized service dealer.

DECLARATION OF CONFORMITY

EC Declaration of Conformity (Only applies to Europe)

We, Husqvarna Outdoor Products Italia, S.p.A., Valmadrera, Italy. Tel: +39--0341--203211, declare that the chain saw models McCulloch Mac 316 XT CSI---AVfrom serial numbers 2007--151(N or D) 00001 and onwards (the year is clearly stated on the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVES:

of 22 June 1998 “relating to machinery” 98/37/EC, annex IIA;

of 3 May 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements; and

of 8 May 2000 “relating to the noise emissions in the environment” in accordance with Annex V of 2000/14/EC. The measured sound power is 110 dB(A), the guaranteed sound power is 118 dB(A) and the net power is 1,0 kW.

The following standards have been applied: ISO 11681-1:2004, EN/ISO 12100-1:2003,

EN/ISO 12100-2:2003, and CISPR 12:2001.

Notified body, 0404 the Swedish Machinery Testing Institute, Fyrisborgsgatan 3 S--754

50 Uppsala, Sweden, has carried out EC type approval. The certificate(s) is numbered:

404/07/1193.

The supplied Chain Saw conforms with the sample that underwent the EC type approval.

07--05--31

Michael S. Bounds, Director

Product Safety and Standards

Handheld Consumer Products

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Manual DE Instrucciones Manuel D’INSTRUCTIONSBetriebsanweisung ON/STOP Identification What is WHAT?Identification of Symbols Clothing Gloves Safety Safety Chaps Shoes Safety RulesHearing Safety Hat Protection Eye Snug Fitting Plan AheadHandle Fuel with Caution Chain SAW Safety EquipmentMaintain Your SAW in Good Working Order Vibration damping system. RegularlyMaintain Control KickbackReduce the Chance Kickback Avoid Pinch-KickbackAttaching the Bumper Spike AssemblyKickback Safety Features Attach the bumper spike with the two screws as illustratedIf not already attached Inside view Chain Brake Adjustment located on Chain BrakeAttaching the BAR & Chain Drive Links Place chain onto the sprocketFueling Engine Operating Your UnitBefore Starting Engine BAR and Chain Lubrication Chain BrakeChain Brake Starting a Warm EngineDifficult Starting or starting a flooded engine Braking function controlFelling Large Trees Cutting MethodsImportant Points Notch CUT and Felling the TreeImportant points Bucking Using a LOG or SUP- Port StandCutting a Fallen Tree Types of Cutting Used for BuckingLimbing Service and AdjustmentsLimbing and Pruning Important Points PruningSpark Plug BAR MaintenanceCarburetor Adjustments Chain SharpeningDeclaration of Conformity Troubleshooting Table Cause RemedyLoad Adjustment Engine Empty fuel tank and refill withTechnical Data Sheet

MAC 316 XT specifications

The McCulloch MAC 316 XT is a highly regarded chainsaw designed for both professional and home use, known for its reliability and performance. This versatile machine is particularly well-suited for cutting firewood, felling small to medium-sized trees, and performing various gardening tasks.

One of the standout features of the MAC 316 XT is its powerful 35cc engine. This two-stroke engine delivers robust power while remaining relatively lightweight, allowing for easier maneuverability and handling during operations. The engine’s design fosters quick starting, thanks to the implementation of advanced primer bulb technology, which minimizes starting effort.

The chainsaw boasts a cutting bar length of 16 inches, providing an optimal balance between cutting power and ease of control. This size is ideal for tackling a variety of cutting jobs, from trimming branches to making clean cuts through larger logs. Coupled with a high-performance, low-vibration chain, users can expect smooth operation and increased cutting efficiency.

Ergonomics is a major consideration in the design of the MAC 316 XT. It features a comfortable grip that reduces operator fatigue during extended use. Additionally, the design includes an anti-vibration system that greatly diminishes the vibrations felt by the user, enhancing comfort and control while working.

For added safety, the MAC 316 XT is equipped with a chain brake that activates instantly in case of kickback, reducing the risk of accidents. The chainsaw also features a translucent fuel tank, allowing users to easily monitor fuel levels during operation, preventing interruptions in work.

Maintenance is made simple with the MAC 316 XT. The air filter is readily accessible for cleaning or replacement, which helps to prolong engine life by ensuring optimal airflow. The tool-less chain tension adjustment is another beneficial feature, allowing users to adjust the chain tension quickly without needing additional tools, thus enhancing the convenience of the device.

In terms of build quality, the MAC 316 XT utilizes durable materials, ensuring resilience against wear and tear. This chainsaw is designed to perform reliably over time, making it a sound investment for users looking for durability and efficiency in their outdoor tasks.

Overall, the McCulloch MAC 316 XT combines power, efficiency, and user-friendly design, making it a top choice for anyone looking to tackle tough cutting jobs with ease. Whether for professional use or DIY gardening projects, the MAC 316 XT delivers a balance of power and comfort, ensuring that users can work effectively without compromising safety or performance.
Top Page Image Contents