Harman 500 quick start Subwoofer REAR-PANEL Controls and Connections, Led

Page 2

SUBWOOFER REAR-PANEL CONTROLS AND CONNECTIONS

On/Standby

LED

Crossover

Control

Phase Switch

Power-On Mode Switch

Subwoofer Level Control

Line-Level In

LFE Connector

Line-Level In

L/R Connectors

Power Switch

Power Cord

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

On/Standby LED: When the Power-On Mode Switch is in the “Auto” position, this LED indicates whether the subwoofer is in the On or Standby state:

•When the LED glows green, the subwoofer is turned on.

•When the LED glows red, the subwoofer is in the Standby mode.

When the Power Switch is set to “Off,” the LED will not light up, no matter what setting the Power-On Mode Switch is in.

Crossover Control: This control determines the highest frequency at which the subwoofer reproduces sounds. The higher you set the Crossover Control, the higher in frequency the subwoofer will operate and the more its bass will “overlap” that of the satellite speakers. This adjustment helps achieve a smooth transition of bass frequencies between the subwoofer and the satellites for a variety of different rooms and subwoofer locations.

NOTE: The Crossover Control functions only when you are using the Line-Level In L/R Connectors. The Line-Level In LFE Connector bypasses the subwoofer’s built-in crossover and Crossover Control.

Phase Switch: This switch determines whether the subwoofer driver’s piston-like action moves in and out in phase with the satellite speakers. If the subwoofer were to play out of phase with the satellite speakers, the sound waves from the satellites could partially cancel out the sound waves from the subwoofer, reducing bass performance and sonic impact. This phenomenon depends in part on the placement of all the speakers relative to each other in the room.

Power-On Mode Switch: When this switch is set in the “Auto” position and the Power Switch is set to “On,” the subwoofer will automatically turn itself on when it receives an audio signal and will enter the Standby mode when it has gone without receiving an audio signal for 20 minutes. When this switch is set in the “On” position, the subwoofer will remain on whether or not it is receiving an audio signal.

Subwoofer Level Control: Use this control to adjust the subwoofer’s volume. Turn the knob clockwise to increase the volume; turn the knob counterclockwise to decrease the volume.

Line-Level In LFE Connector: This input bypasses the subwoofer’s internal crossover circuitry, so use it only with a receiver or processor subwoofer output that has been low-pass filtered. If your receiver or processor does not have a dedicated subwoofer output that is low- pass filtered, use the subwoofer’s Line-Level In L/R Connectors (see below) instead.

Use the supplied mono RCA cable (purple connectors) to connect the Line-Level In LFE Connector to the dedicated subwoofer output of a receiver or preamp/processor.

Line-Level In L/R Connectors: These inputs pass through the subwoofer’s built-in crossover. Use them if your receiver or preamp/ processor does not have a dedicated subwoofer output that is low- pass filtered.

Power Switch: Set this switch in the “On” position to turn the subwoofer on. The subwoofer will then be in On or Standby mode, depending on the setting of the Power-On Mode Switch.

Power Cord: After you have made and verified all subwoofer and speaker connections described in this manual, plug the power cord into an active, unswitched electrical outlet for proper operation of the subwoofer. DO NOT plug this cord into the accessory outlets found on some audio components.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Thank YOU for Choosing this JBL Product Included ItemsSubwoofer REAR-PANEL Controls and Connections LEDCenter Speaker Placing the SpeakersFront Left and Right Speakers Surround Speakers and SubwooferWALL-MOUNTING Speaker Mounting OptionsSHELF-MOUNTING Speaker Connecting the Subwoofer To a Receiver or PREAMP/PROCESSOR with a Preamp OutputsSubwoofer Adjustments Phase Subwoofer Adjustments Crossover ControlSubwoofer Adjustments Volume Operating the SubwooferCinema 500 Satellite Speakers SpecificationsCinema 500 System Cinema 500 Center Speaker

500 specifications

The Harman 500 is a sophisticated audio product that exemplifies superior sound engineering, designed for enthusiasts who demand a premium listening experience. This high-fidelity audio device combines advanced technology and thoughtful design, making it a standout choice in the competitive audio equipment market.

One of the most notable features of the Harman 500 is its powerful amplification system. Equipped with state-of-the-art amplifiers, the device ensures high output without distortion, allowing the user to enjoy crisp, clear sound even at high volumes. This amplification capability is complemented by advanced digital signal processing technology that optimizes audio performance in real-time, adapting to various sound environments.

The Harman 500 also boasts an impressive speaker configuration, typically incorporating multiple drivers that cover a wide range of frequencies. This multi-driver setup ensures a balanced sound stage, allowing users to experience the depth and richness of their music as intended by the artists. Additionally, the speakers are often coupled with high-quality materials and construction techniques, which enhance durability and performance.

Connectivity is another strong point of the Harman 500. It usually includes Bluetooth capabilities, enabling easy pairing with smartphones, tablets, and laptops for seamless streaming. Furthermore, it often supports various audio formats and protocols, ensuring compatibility with a wide range of devices and services. Many models also feature auxiliary inputs, USB ports, and even Wi-Fi capabilities, making them versatile choices for any audiophile’s setup.

User-friendly controls are integral to the Harman 500's design. The interface is typically intuitive, with easy-to-navigate buttons and knobs that allow users to adjust settings such as volume, tone, and input selection quickly. Some models may even feature customizable EQ settings, empowering users to tailor the sound to their personal preferences.

Another critical aspect of the Harman 500 is its aesthetic appeal. The design often combines modern lines with premium finishes, allowing it to seamlessly blend into any home decor. Whether placed on a shelf or as a centerpiece in a room, it is as much a piece of art as it is a functional audio device.

In summary, the Harman 500 stands out with its powerful amplification, advanced audio technologies, user-friendly controls, versatile connectivity options, and stylish design. It's a top-tier choice for anyone looking to elevate their audio experience.
Top Page Image Contents