Intel SYS7180VE Slot not empty, System halted, CTRL-ALT-DEL to Reboot, Wrong board in slot

Page 32

CHAPTER 3 - BIOS SETUP

The board installed is not responding to the ID request, or no board ID has been found in the indicated slot.

NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISA Configuration Utility.

Slot not empty

Indicates that a slot designated as empty by the EISA Configuration Utility actually contains a board.

NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISA Configuration Utility.

System halted, (CTRL-ALT-DEL) to REBOOT ...

Indicates the present boot attempt has been aborted and the system must be rebooted. Press and hold down the CTRL and ALT keys and press DEL.

Wrong board in slot

PLEASE RUN EISA CONFIGURATION UTILITY

The board ID does not match the ID stored in the EISA non-volatile memory.

NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISA Configuration Utility.

Floppy disk(s) fail (80)

Unable to reset floppy subsystem.

Floppy disk(s) fail (40)

Floppy Type dismatch.

Hard disk(s) fail (80)

HDD reset failed.

Hard disk(s) fail (40)

HDD controller diagnostics failed.

Hard disk(s) fail (20)

HDD initialization error.

Hard disk(s) fail (10)

Unable to recalibrate fixed disk.

Hard disk(s) fail (08)

Sector Verify failed.

Keyboard is locked out - Unlock the key.

Unlock the key. BIOS detect the keyboard is locked. P17 of keyboard controller is pulled low.

Keyboard error or no keyboard present

Cannot initialize the keyboard. Make sure the keyboard is attached correctly and no keys are being pressed during the boot.

Manufacturing POST loop

System will repeat POST procedure infinitely while the P15 of keyboard controller is pulling low. This

SYS7180VE User’s Manual

57

CHAPTER 3 - BIOS SETUP

is also used for M/B burn in test.

BIOS ROM checksum error - System halted

The checksum of ROM address F0000H-FFFFFH is bad.

Memory test fail

BIOS reports the memory tests fail if the onboard memory is tested error.

58

SYS7180VE User’s Manual

Image 32
Contents SYS7180VE Copyright AcknowledgmentsLiability Additional Information and AssistanceTable of Contents Specification Power RequirementsCheck List DescriptionConnector & Jumper Location +3.3+5 VSB standby +12Block Diagram Installation procedureCPU Installation Main Memory Installation DIMM1/2Dimm size Non-ECC configuration Host Bus frequency Cache sizeJumper Settings Intel 82845GV Gmch overviewConnectors Setting Short 1-2 defaultUSB12 USB34Front Panel Connector J1 USB Connector USB1-2 USB3-4IDE port Connector IDE1/ IDE2 Parallel Port Connector LPTSerial Port connector COM1/COM2 PIN No Function Floppy Disk Connector FloppyAdapter connector for 10/100 LAN LAN1 Adapter connector for Giga LAN LAN2 External Keyboard/Mouse ConnectorVGA Connector Keyboard / Mouse ConnectorCPU FAN Connector Acpi Connector J2Introduction Starting SetupUsing Setup Main Menu Standard Cmos Setup Virus Warning Advanced Bios Features SetupIDE Adapters Description Choice Advanced Chipset Features Setup Typematic Delay MsecSecurity Option Dram Timing SelectableActive to Precharge delay Dram RAS# to CAS# delaySystem Bios Cacheable Video Bios CacheableIntegrated Peripherals On-Chip Primary PCI IDE IDE Primary Master/Slave PIOIDE Primary Master/Slave Udma On-Chip Secondary PCI IDEYour system. Most of the following fields Acpi function Power Management SetupPower management HDD Power Down Power On by RingVideo Off Method Video Off In Suspend Suspend Type Select the Suspend Type Modem Use IRQResume by Alarm PnP/PCI Configuration Setup IRQ n ResourcesDefaults Menu Supervisor/User Password SettingPC Health Status Exit SelectingPost Beep Error MessagesPost Messages Error encountered initializing hard drive Error initializing hard disk controllerFloppy disk controller error or no controller present Invalid Eisa configurationSystem halted, CTRL-ALT-DEL to Reboot Bios ROM checksum error System haltedSlot not empty Wrong board in slotAppendix Watch-Dog-Timer WDT Setting

SYS7180VE specifications

The Intel SYS7180VE is a high-performance server system designed to meet the demanding requirements of modern data centers. It is engineered to deliver reliable performance and scalable solutions for a diverse range of applications, including Big Data analytics, cloud computing, and high-performance computing.

One of the main features of the SYS7180VE is its support for the Intel Xeon Scalable processors. This allows the system to harness the immense power of multi-core processing, enabling simultaneous execution of multiple tasks and delivering outstanding throughput. The architecture supports advanced technologies such as Intel Turbo Boost Technology, which dynamically adjusts the processor's frequency, optimizing performance based on workload demands.

In terms of memory, the Intel SYS7180VE is equipped with DIMM slots that support both DDR4 memory and Intel Optane DC Persistent Memory. This combination enhances memory bandwidth and capacity while ensuring data is readily accessible for processing. The system can achieve significant performance improvements, particularly in memory-intensive applications, thanks to its support for larger memory configurations.

Storage options in the SYS7180VE are robust, featuring multiple drive bays that can accommodate a mixture of HDDs and SSDs. This flexibility enables users to tailor their storage solutions to meet their specific needs, striking a balance between performance and capacity. Additionally, the integrated RAID controller offers data redundancy and protection, ensuring system reliability.

Networking capabilities are another highlight of the SYS7180VE. The system comes with integrated Intel Ethernet controllers, offering high-speed connectivity to support data-intensive workloads. With support for network virtualization and advanced traffic management features, the server is ideal for modern cloud environments requiring high bandwidth and low latency.

The SYS7180VE also emphasizes security, incorporating Intel Platform Trust Technology and Trusted Execution Technology to protect against unauthorized access and ensure data integrity. These features are essential for organizations that prioritize cybersecurity in their IT infrastructure.

Finally, the design of the Intel SYS7180VE promotes efficient thermal management. The system's architecture allows for optimal airflow and cooling, which is crucial for maintaining performance and reliability in high-density computing environments.

In summary, the Intel SYS7180VE combines cutting-edge technologies and robust features to deliver a powerful server solution that meets the challenges of today's data-centric applications. With its scalable architecture, high memory capacity, flexible storage options, and advanced networking features, it is poised to empower enterprises in their quest for digital transformation.