Motorola DSR-6000 manual Xpndr Field

Page 24

3

Xpndr Field

This field is not available when the ASI In option in the Input field is selected.

This field allows selection of an initial satellite transponder number and can only be used if the Xpndr option in the Mode field is selected. The Xpndr field cannot be edited if L Freq in the Mode field is selected. Press the4button until the cursor is at the Xpndr label. Then press the ENTER button to move into the field.

Then press the 56 buttons to select the desired transponder number. Since the associated transponder/frequency tables are stored in the DSR-6000, scroll through the transponder numbers and notice that the associated frequency (shown in the LFreq field to the right) automatically changed with the selection (970-1430 MHz). There are 24 transponder options, and when the desired transponder selection is displayed, press the ENTER button to confirm selection and move the cursor back up to the field label.

LFreq Field

This field is not available when the ASI In option in the Input field is selected.

If the LFreq option in the Mode field is chosen, use this field, to directly tune the frequency. The LFreq field cannot be edited if Xpndr is chosen in the Mode field. Press the4button until the cursor is at the LFreq label. Then press the ENTER button to move into the field.

Use the arrow buttons (34 56) to select the desired frequency. Select a frequency between 950 MHz and 2150 MHz and press the ENTER button to confirm a selection and move the cursor back up to the field label.

For those satellite carriers which are offset (C-band or Ku-Band), use the L Freq option to enter the exact center frequency of a carrier, rather than using a nearby- but-not-exact C-band transponder center frequency. Long-term frequency tracking is best if the user enters a precise carrier center frequency.

Contact the programmer or network operator for details about the satellite, transponder, and frequencies being used. If one frequency is identified as the root transponder, using this frequency may expedite the download process during installation.

16

Image 24
Contents Document No Operation Precautions Important Safety Instructions Page Table of Contents AS Authorization State Field Iii Chapter Key Features Introducing the DSR-6000Page Connecting the DSR-6000 Unpacking and Connecting the DSR-6000Relay Alarm Unpacking MountingConnecting the DSR-6000 To Connect a DSR-6000 for a New DigiCipher II ServiceOperating the DSR-6000 DSR-6000 Front PanelUsing the Front Panel Navigating the Menus How to Use the Menus Installation Menus Overview of The LCD Panel Menu TreeChannel Selection Menus Status Menus Installation Menus Manual Tune MenuInput Field Default Port Xpndr Field Modulation Menu Port Menu ID Field Default Audio1, Audio2, and Audio 3 Menus Compress Field Default Moderate Audio1, Audio2, and Audio3 Gain Menus Alarm Menu ASI Output Menu Programmer Broadcast Network Controller BNCReset Menu Core Menu Video Out Format Menu Firmware Menu Download Menu DR Menu Acquisition Recovery Channel Menus Channel MenuXpndr Field Mpeg Select Menu Decrypt Setup Menu Aud1Lang, Aud2Lang, and Aud3Lang Menus Left and Right Fields Text Lang Menu IP Menus MAC Address MenuDhcp Menu IP Address Menu Subnet Mask MenuPort GigE MAC Address Menu Default hhhhhhhhhh IP Gateway MenuGigE IP Address Menu GigE Default Gateway Menu GigE Mode MenuGigE Subnet Mask Menu GigE Mpts Address Menu AMS Address MenuStatus Display Menus Status1 MenuStatus2 Menu Status3 Menu Status4 MenuStatus5 Menu Diagnostics Menus Status6 MenuUnit Address Menu Audio Test Signal Menu Default Off TV Pass Card MenuVideo Test Signal Menu NTSC/PAL M Test Pattern OptionsVits Menu NTSC/PAL M Vits Pattern Field OptionsAd Insertion Test Menu Page Troubleshooting Troubleshooting Solutions Problem Possible Cause ReferencePage Product Support If You Need HelpCalling for Repairs Page Downlink/L-Band Frequency Conversion Tables Calculation for C-Band TranspondersPage Language Abbreviations Language Abbreviation Diagnostics IntroductionViewing the Fast Fact Diagnostic Screens FF1Fast Facts Screens Fast Facts Name Definition Fast Facts Fast Facts VMC Fast Facts 4 Audio 1 Fast Facts 4 Audio Fast Facts 5 10/100 Network Fast Facts 5 Gigabit Ethernet Fast Facts GigE NetworkDSR-6000 Specifications Transmission StandardAudio Electrical Page Recycling Page Page Sequence Dr San Diego, CA Document No 557526-001, Rev. a

DSR-6000 specifications

The Motorola DSR-6000 represents a significant advancement in the realm of digital video and data satellite communication technology. Launched as part of Motorola's DSR series, this system integrates state-of-the-art technologies to facilitate superior signal processing and distribution, catering to a variety of broadcast and network requirements.

One of the standout features of the DSR-6000 is its ability to decode multiple video formats, including MPEG-2 and MPEG-4. This versatility allows broadcasters and service providers to deliver high-quality content efficiently, whether the format is standard definition or high definition. The system supports multiple audio formats as well, enhancing the overall viewer experience by providing options for Dolby Digital, MPEG audio, and others.

In addition to its robust decoding capabilities, the DSR-6000 boasts exceptional signal processing technologies. It is designed to handle both satellite and terrestrial inputs, making it a flexible option for operators who need to integrate various feeds into their service offerings. The device is equipped with advanced Error Correction technologies, ensuring minimal signal degradation, even in challenging reception conditions.

The DSR-6000 integrates a user-friendly interface that simplifies operational tasks. Configuration, monitoring, and control are straightforward, allowing technicians to efficiently manage the system without extensive training. The system also supports remote management capabilities, enabling operators to monitor and configure the unit from a distance, which significantly reduces service downtime.

Built with scalability in mind, the DSR-6000 can adapt to the evolving demands of digital broadcasting and data services. It allows for future upgrades, ensuring that users can implement new technologies as they emerge without replacing the entire system.

Another significant characteristic of the DSR-6000 is its compatibility with various network protocols, including ASI, IP, and DVB. This compatibility enhances the system’s interoperability with existing infrastructure, making it an optimal choice for diverse network environments.

Moreover, the DSR-6000 is designed with energy efficiency in mind, featuring low power consumption without compromising performance. This makes it an environmentally friendly option for broadcasters looking to reduce their carbon footprint while still delivering high-quality services.

In summary, the Motorola DSR-6000 is a technologically advanced satellite receiver that highlights the company's commitment to excellence in digital broadcasting. With its multiple format support, robust signal processing, user-friendly interface, and energy-efficient design, it stands out as a reliable and versatile solution for modern broadcasting challenges.