ENGLISH (Original instructions)
SPECIFICATIONS
| Model | UC3050A |
| UC3051A | UC3550A |
| UC3551A |
| UC4050A |
| UC4051A | UC4550A |
| UC4551A | |
Max. chain speed |
|
|
|
|
| 14.5 m/s (880 m/min) |
|
|
|
|
| ||||
Standard guide | Bar length | 300 mm | 350 mm |
| 400 mm | 450 mm | |||||||||
Cutting length | 260 mm | 320 mm |
| 355 mm | 415 mm | ||||||||||
bar |
|
| |||||||||||||
| Guide bar type |
|
|
|
|
| Sprocket nose bar |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| ||||
Standard saw | Type |
|
|
|
|
| 91PX |
|
|
|
|
| |||
Pitch |
|
|
|
|
|
| 3/8" |
|
|
|
|
| |||
chain |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
| No. of drive links |
| 46 |
| 52 |
|
| 56 |
| 62 | ||||
Recommended guide bar length |
|
|
|
|
| 300 - 450 mm |
|
|
|
|
| ||||
Overall length (without guide bar) |
|
|
|
|
| 505 mm |
|
|
|
|
| ||||
| Net weight | 5.4 kg |
| 5.5 kg | 5.5 kg |
| 5.6 kg | 5.7 kg | |||||||
Extension cable (optional) |
|
|
| DIN 57282/HO 7RN |
|
|
| ||||||||
•Due to our continuing program of research and development, the specifications herein are subject to change without notice.
•Specifications may differ from country to country.
•Weight according to
Symbol
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
･ Read instruction manual and follow the
warnings and safety instructions. ･ Wear eye protection.
･ Wear ear protection.
･ DOUBLE INSULATION
･Caution: particular care and attention
required!
･ Caution: withdraw the mains plug immediately if the cable is damaged!
･ Caution: kickback!
･ Protect against rain and damp!
･ Wear a helmet, goggles and ear protection!
･ Wear safety gloves!
･ Withdraw the mains plug! ･ First aid
･ Maximum permissible length of cut ･ Direction of chain travel
･ Chain oil
･ Chain brake released
･ Chain brake applied
･ Prohibited!
･ Only for EU countries
Do not dispose of electric equipment together with household waste material!
In observance of the European Directive, on Waste Electric and Electronic Equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to
an environmentally compatible recycling facility.
Intended use
The tool is intended for cutting lumbers and logs.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on
2