P 2/ 8
Repair
CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
[1] NECESSARY REPAIRING TOOLS
Code No. | Description | Use for |
|
|
|
1R370 | Ring Terminal Setting Jig | connecting Ring terminals to Brush holder |
|
|
|
1R063 | Guide Bar for fitting Field | assembling Field to Motor housing complete |
|
|
|
[2] LUBRICATION
It is not required to lubricate, because the product has no gear mechanism to be lubricated.
[3]DISASSEMBLY/ASSEMBLY
[3]-1. Switch
DISASSEMBLING
1.Switch can be disassembled without separating Fan housing complete section. See Fig. 1.
Fig. 1
1.Remove four 4x18 Tapping screws that secure Handle cover to Motor housing.
Handle cover
4.Remove Switch from Handle section of Motor housing complete.
Switch
2.Separate Handle cover, pulling toward Fan housing complete side (pulling toward the direction designated with arrow No.1.)
3.Disassemble Handle cover by broadening Handle cover (pulling its ends toward the direction designated with arrow No. 2). Now, Handle cover is removed.
Handle cover
Fan housing
No.1
complete 
No.2
ASSEMBLING
Assemble Switch by reversing the disassembly procedure. Refer to Fig. 1. Note: When mounting Handle cover, be careful of the following.
•Switch and Lead wire are not pinched with Handle cover. Refer to Fig.
•There are no gaps between Handle cover and Fan housing complete.