Infinity 653.1cs, 1.1cs manual Adjusting the Sound, General Care, Specifications

Page 4
Steen Michaelsen
Infinity Systems A/S Birkerød. DENMARK. 2/98
Infinity Systems, Inc. • 250 Crossways Park Drive,
Woodbury, NY 11797 USA • (516) 496-3400 • FAX (516) 682-3583

ADJUSTING THE SOUND

A NOTE ON POWER HANDLING

SPECIFICATIONS

After you have connected all the speakers to the crossover according to the connection diagram, you may adjust the overall sound of the system to suit your taste.

The output of the woofers may be decreased by moving the woofer + connection at the crossover to the low position.

The output of the midrange may be decreased by moving the midrange + connection at the crossover to the low position.

The output of the tweeter may be increased by moving the tweeter + connection at the crossover to the high position or decreased by moving it to the low position.

The speakers used in Kappa Series 3-Way Component Systems are designed to produce rea- sonable volume levels with little amplifier power. However, the addition of an amplifier to drive your speakers and a subwoofer will enhance the dynamic range of your system, and help over- come the ambient noise in a moving vehicle. Kappa speakers are designed to handle the power of a dedicated amplifier driven at or below its rated power. If an amplifier is driven far above its rated power, the output signal will “clip,” and the additional power present in a clipped signal can damage any speaker. Distorted or “fuzzy” sound from your speakers is an indication that the ampli- fier has exceeded its rated power, and you should reduce the volume level

GENERAL CARE

The loudspeaker grilles may be cleaned with a slightly damp cloth. Do not use any cleaners or solvents on the grilles or the speaker cones.

653.1cs

 

Type:

6-1/2" 3-Way System

Speaker Impedance:

4 ohms

Power Handling:

120 watts per channel

Frequency

 

Response (±3dB):

50Hz ~ 45kHz

Sensitivity:

89Hz @ 2.83 V, 1 watt

Crossover Frequencies: Woofer

 

Hi terminal: 210Hz

 

Lo terminal: 130Hz

 

Midrange: 400Hz

 

Tweeter: 12.5kHz

Mounting Depth,

 

Drop-in Woofer:

2-1/2" (67.5 mm)

Cut-out

 

Diameter Woofer:

5-11/16" (149 mm)

Mounting Depth,

 

Drop-in Midrange:

1-13/16" (46 mm)

Cut-out

 

Diameter Midrange:

3-3/4" (96 mm)

Mounting

 

DepthTweeter:

1" (25.4 mm)

Cut-out

 

DiameterTweeter:

3-3/8" x 1-3/4"

 

(84.6 mm x 44.7 mm)

1.1cs

 

Type:

6" x 9" 3-Way System

Speaker Impedance:

4 ohms

Power Handling:

200 watts per channel

Frequency

 

Response (±3dB):

36Hz ~ 45kHz

Sensitivity:

89Hz @ 2.83 V, 1 watt

Crossover Frequencies: Woofer

 

Hi terminal: 210Hz

 

Lo terminal: 130Hz

 

Midrange: 400Hz

 

Tweeter:12.5kHz

Mounting Depth

 

Drop-in Woofer:

2-9/16" (65 mm)

Cut-out

 

Diameter Woofer:

5-11/16" x 8-3/4"

 

(149 mm x 223 mm)

Mounting Depth,

 

Drop-in Midrange:

1-13/16" (46 mm)

Cut-out

 

Diameter Midrange:

3-3/4" (96 mm)

Mounting

 

Depth Tweeter:

1" (25.4 mm)

Cut-out

 

DiameterTweeter:

3-3/8" x 1-3/4"

 

(84.6 mm x 44.7 mm)

DECLARATION OF CONFORMITY

We, Infinity Systems A/S

Kongevejen 194B

DK-3460 Birkerød

DENMARK

declare in own responsibility, that the products described in this owner’s manual are in compliance with technical standards: EN 50 081-1/1992

EN 50 082-1/3.1995

®

Image 4
Contents S T R U C T I O N S Speaker Placement Installation Warnings and TipsWire Codes Woofer Installation Midrange InstallationTweeter Installation Specifications Adjusting the SoundGeneral Care

1.1cs, 653.1cs specifications

The Infinity 653.1cs and 1.1cs series showcases remarkable advancements in design and technology, blending aesthetics with functionality for uncompromised performance. These models epitomize a commitment to innovation in the world of consumer technology, catering to a variety of users from casual enthusiasts to professionals seeking high-quality equipment.

One of the main features of the Infinity 653.1cs series is its superior audio performance. The sound produced is rich and immersive, thanks to state-of-the-art components that ensure clarity and precision across a wide frequency range. The integration of advanced digital signal processing (DSP) enhances audio fidelity, allowing for a custom listening experience tailored to the user’s preferences.

Another key technology integrated into these models is the use of high-efficiency drivers. These drivers not only improve overall sound output but also enhance energy-saving capabilities, making them an environmentally friendly choice without compromising on performance. This attention to sustainable technology positions the Infinity 653.1cs series as a frontrunner in the industry.

The ergonomic design of the units also sets them apart. Whether in a home studio or a professional environment, the sleek and modern aesthetics blend seamlessly with any setup, while the thoughtful layout of controls places emphasis on user-friendliness. The intuitive interface allows users to adjust settings effortlessly, promoting an uninterrupted workflow.

Connectivity is another standout characteristic, with multiple input options designed to accommodate both wired and wireless devices. Users can easily switch between sources, making the Infinity 653.1cs a versatile choice for those who utilize various audio equipment. This flexibility ensures that users can integrate their existing technology with minimal hassle.

Additionally, the build quality is remarkable, featuring durable materials that promise longevity. Each unit has been extensively tested to withstand the rigors of daily use, ensuring they remain reliable over time.

In summary, the Infinity 653.1cs and 1.1cs series combine cutting-edge technology with an emphasis on user experience, delivering exceptional audio performance, eco-friendly operation, and versatility in connectivity. As a result, they are ideal for anyone looking to elevate their audio experience, representing a significant leap forward in modern audio technology.