Infrared connections

We recommend the T568A wiring method, which is shown below.

The functions of each wire connection are also shown.

future use brown future use white/brown Infrared orange ground white/blue +12 vdc blue

future use white/orange SDA green SCL white/green

Run CAT5 wire from the keypad location to the CI6 location for each keypad or run it from keypad to keypad location. Ideally home runs are used as they leave the installation more “future proof” and reliable. Leave an extra 1 m or 3 feet on each side to make it easier to work on. Add a RJ45 connector of the right type for the CAT5 wire you have selected (not all CAT5 wires are the same) and crimp the connector to the wire on each side. Plug the RJ45’s into the MR164 and correct CI6 ports.

Note: MR164 keypad installer programming, see MR164 programming near the end of this manual.

On the rear of the CI6 there are seven infrared pass though ports. Each of the 1 through 6 corresponds to the keypad port next to them. For example IR port #3 is the infrared output for keypads connected to KEYPAD #3. The infrared ALL is the combination of all of the 6-keypad ports.

Using this method of infrared routing you can have six sources the same (like 6 identical AM/FM tuners) one for each zone and they can be controlled individually in each room. Each port can control up to 8 devices using 4 of our optional IR34a emitters and one IR55 connection block.

Each infrared port is a standard 3.5mm mono jack.

DATA IN and DATA OUT connections

On the rear of the CI6 amplifier there are two 3.5mm stereo jacks labeled DATA IN and DATA OUT. These ports connect two or more CI6’s together so they can share infrared commands and ALL commands (such as All Off)

When connecting two CI6’s together in one system you will need:

1.Up to fourteen (one for each active source) RCA patch cords

2.A 3.5mm stereo patch cord.

We do not recommend using “Y” adaptors in this case. Normally the two CI6’s are near each other. If they are far apart then balancing baluns may be required to eliminate stray noise on the lines.

C16 specifications

Knoll Systems C16 is an advanced multi-room audio distribution system that has gained recognition for its superior sound quality and versatility. Designed for both residential and commercial applications, the C16 caters to the needs of audiophiles and casual listeners alike, providing an impressive audio experience throughout any space.

One of the standout features of the C16 is its capability to support up to 16 zones, allowing users to enjoy different audio sources in various rooms simultaneously. This modular design means that users can easily expand their systems as needs evolve, making it an investment that evolves with changing requirements.

The C16 employs state-of-the-art digital signal processing (DSP) technology to deliver clear, precise sound. By optimizing sound quality for individual rooms, the system ensures that the auditory experience is tailored and enhanced. The customizable equalizer settings further allow users to fine-tune audio output based on their preferences and the unique acoustics of each space.

Another key characteristic of the Knoll Systems C16 is its compatibility with a variety of audio sources. The system supports streaming platforms, local libraries, and traditional media, making it a comprehensive solution for music lovers. Integrated Wi-Fi and Bluetooth connectivity also facilitate seamless playback from smart devices, promoting convenience and flexibility.

User control is simplified through the intuitive interface of the C16. The system can be managed via a mobile app, providing easy navigation and control over individual zones. Additionally, voice command integration with popular smart home systems enhances the user experience, allowing for hands-free operation.

Built for durability and efficiency, the C16 is designed with energy-saving features that minimize power consumption without compromising performance. Whether installed in a luxury home or a bustling commercial environment, the system’s robust build quality ensures reliable operation.

In conclusion, the Knoll Systems C16 stands out as a leading multi-room audio solution, combining advanced technologies, flexible feature sets, and exceptional sound quality. With its ability to adapt to varied environments and its user-friendly controls, the C16 is an excellent choice for anyone looking to enhance their audio experience. Whether for enjoying music alone or entertaining guests, this system truly sets the standard for multi-room audio distribution.