Warranty, Features | Knoll Systems IR320 instruction

IR320 Infrared Receiver Specifications:

Specifications
Infrared carrier frequency:	25-65 kHz
Indoor reception range:	100 feet (30 meters) max.
Nominal reception angle:	50 degrees off axis
Maximum wire length:	1000’ (300m) or even more with
	larger gauge wire
Wire requirements:	3 conductors, minimum 24-gauge
	to 200’; 22-gauge up to 500’;
	20-gauge to 1000’
Power requirements:	12VDC, 40mA
Dimensions:	15/19” x 3/8” x 1/2" h
	(24 mm x 10 mm x 13mm h)

Requires 12VDC power supply, emitter(s) and a connection block.

Warranty

Knoll Systems warrants its products (with certain exceptions) sold in the USA and Canada by authorized Knoll dealers to be free of defects in materials and workmanship. This warranty extends for three full years from the date of purchase by the original consumer. Any products returned to Knoll Systems and found to be defective by Knoll Systems within the warranty period will be repaired or replaced at Knoll Systems option, at no charge. Knoll Systems will not be responsible for the actual cost of installation or removal of the product, nor for any incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have additional legal rights that vary from state-to-state.

IR320

Micro Infrared Receiver

Installation Instructions v1.0

Warning: To be installed and/or used in accordance with appropriate electrical codes and regulations.

Introduction: Thank you for your purchase of a Knoll IR320 infrared receiver. This receiver features the ability to pick up a remote control infrared signal and relay it on wires to the inside of a cupboard or to another location up to 1000’ (or more).

Actual size

Features:

∙Very small design.

∙More forgiving than previous designs and can work short distances in direct sunlight.

∙Will relay almost all remote control types.

∙Requires very little power. Suggest using Knoll PS1205 for up to ten IR320’s.

∙Up to ten Knoll infrared receivers can be connected in a single system.

∙Available in black, white and silver colors.

∙Connects with a three wire connector or 3.5mm plug.

Knoll Systems www.knollsystems.com

145 Tyee Drive Point Roberts, WA 98281

14-7163 Vantage Way, Delta BC V4G 1N1 Telephone: (604) 940-1689, Fax (855) 734-3363 www.knollsystems.com

Installation Tips

1.Follow all local electrical & building code requirements.

2.The IR320 is usually mounted to the wall or cabinet using the included double sided tape. For easy installation and to ensure reliability, it is suggested to use a Knoll PS1205 power supply, Knoll single or dual emitters and a Knoll connection block or hub.

IR320 specifications

The Knoll Systems IR320 is a cutting-edge infrared receiver designed to enhance audio and visual experiences in home theaters, conference rooms, and various other settings. This device is engineered to provide reliable IR signal reception, ensuring seamless control of entertainment systems and AV equipment.

One of the standout features of the IR320 is its strong performance in capturing infrared signals. With a high sensitivity level, it can pick up signals from remote controls even from a considerable distance, making it an essential component for systems requiring flexibility in control. Its ability to minimize interference from other electronic devices ensures stable operations, which is crucial in environments rich with various technologies.

The Knoll Systems IR320 utilizes advanced filtering technologies to eliminate noise and enhance the clarity of the signal it receives. This feature is particularly useful in crowded areas or rooms where multiple infrared frequencies may overlap, guaranteeing that the intended command is executed without delays or cross-signaling issues.

Another significant characteristic of the IR320 is its user-friendly design. The device is compact and aesthetically pleasing, allowing it to blend seamlessly into existing decor whether mounted on a wall or positioned on a shelf. Its installation process is straightforward, ensuring that users can set it up with minimal effort and time.

Additionally, the IR320 is equipped with versatile connectivity options, supporting various audio and visual equipment brands. This ensures compatibility with a wide range of devices, from televisions and projectors to AV receivers. This adaptability makes it an ideal choice for individuals looking to create a cohesive AV setup.

Moreover, the IR320 features robust build quality, designed to withstand the rigors of everyday use. Its durability ensures longevity, providing users with a dependable solution for their AV control needs.

In summary, the Knoll Systems IR320 IR receiver combines high sensitivity, advanced filtering technologies, user-friendly design, versatile connectivity, and durable construction, making it a top choice for anyone seeking to elevate their audio-visual control experience. With the IR320, users can expect enhanced performance and reliability in their home theater or professional AV setups.