Lexicon PCM96 manual Networking, A network has its own IP address to identify it. Example

Page 30

Networking

This section provides a step-by-step guide on how to properly connect the PCM96 Surround to a Local Area Network (LAN) for several different net- work architectures. The first topology is a simple direct connection using the provided Ethernet cable. The second method describes how to connect and configure several PCM96 Surround units to create an isolated network using an Ethernet switch with static or with DHCP. This section concludes with some further networking considerations and troubleshooting tips that will help with connecting to your PCM96 Surround via Ethernet. If your appli- cation is more than these simple examples we recommend that you involve a trained Ethernet network administrator in the design and commissioning of your system.

Careful planning needs be made before placing a PCM96 Surround on a network that provides any access to the public. Some examples of public access are direct access to the unit from the Internet, an unsecured or weakly secured wireless network, a network jack in a public area that provides net- work access to the PCM96 Surround, or having a computer on the LAN that is not secured so that someone could use it to reconfigure the PCM96 Surround. It is highly recommended that the equipment be placed on a pro- tected, isolated network that does not have any connection to the public to prevent unauthorized users from reconfiguring the unit. Please refer to the VPN portion of this section for more information. Factory defaults for the Internet Protocol (IP) settings for the PCM96 Surround are as follows:

 

Auto-IP/DHCP Address:

169.254.x.x (where “x.x” is determined by

 

 

the PCM96 Surround box numbers)

 

Subnet Mask:

255.255.0.0

 

Gateway:

0.0.0.0

 

DHCP Support:

Enabled

 

Overview of TCP/IP Basics

 

IP address

 

 

An identifier for a computer or device on a TCP/IP network. Each device

 

in a network has its own IP address to identify it. Example: 126.126.17.42.

 

Networks using the TCP/IP protocol route messages based on the IP address

 

of the destination. An IP address is made of four numbers separated by peri-

 

ods. Each number can be zero to 255. The last number should not be a zero

 

or 255. For example, 126.126.17.1 could be an IP address. 126.126.17.0

 

would not be a valid IP address. A TCP/ IP or IP address has two parts:

 

the NETWORK ID and the HOST ID. The NETWORK ID identifies

 

the network, and the HOST ID identifies either the subnet and device, or

 

just the device if there is no subnet. The subnet mask is a code that indi-

 

cates which part of the TCP/IP address is the NETWORK ID and which

 

part is the HOST ID. In subnet-mask code, 255 means “This part of the

 

address is the NETWORK ID”. Example: Suppose the IP ADDRESS of

 

a device is 192.168.xx.yy and the SUBNET MASK is 255.255.x.y. That

 

means, (192.168) is the NETWORK ID. The remaining set of numbers (xx.

 

yy) is the HOST ID. If your network stands alone (it is not part of a larger

 

network) then the HOST ID identifies each device in the network. If your

24

network is part of a venue’s larger network, your network is actually a sub-

network or subnet.

 

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Page Important Safety Instructions Declaration of Conformity Warranty Initializing/Formatting a Compact Flash Card How to Assign a Base Channel to the PCM96 Introduction Page Front Panel Back Power ButtonDisplay LoadRear Panel Digital Model Power JackFireWireTM Ports Ethernet InputsPage Rear Panel Digital and Analog Model DB25 6-channel Analog IN/OUTPage 1Single Stereo Config Using the PCM96 Surround1SinglConcertHallStereo-FlaCongefig4896 Category Selection Screen System Presets To select a different category1ConcertHall-Flange 0Med Hall Save As Single Stereo Config Initializing/formatting a Compact Flash Card DSP Configurations AnalogMono signal is split into a stereo signal Cascade Stereo Single two in Five Out PCM96 Surround Plug-IN Minimum System RequirementsPage About RepairPCM96 Surround Communication NameFireWire Setting UpdateDriver Buffer Setting CancelNetworking A network has its own IP address to identify it. ExampleDhcp Virtual Private Networks VPN Ethernet Link Analog Setup AES SetupSystem Menu Midi Device IDTempo Value Base ChannelBank Dump Tempo BeatInput Level Machine MenuWet Dry Mix Output LevelUsing Midi Channel Usage Description Bank Presets Bank # Soft Row ParameterByte Definition Comments EOXBank Bank to fetch 0xF7 Algorithms Hall Surround, Stereo and Mono Random Hall Surround, Stereo and Mono Resonant Chords Surround, Stereo and Mono Chorus/Flange Surround, Stereo and Mono Pitch Shift Standard VSO Bass Boost Room ParametersBandwidth Bass Crossover BassXOverDelay Time Echo Delay Delay Feedback MasterDelay Level Master Delay Time MasterFeedback Level FeedbackFeedback Diffusion Feedback PanReflection Delay Delay Time Master Echo DelayMaster Reflection Delay Reflection Time Master Master Echo FeedbackReflection Gain Level Resonance Tuning MasterReverb PreDelay Predelay ResonanceReverb Wander Reverb Spin SpinReverb Time Hi Cut Room SizeSignal Type Signal Event FreqSignal Frequency ShelfTap Slope TypeWet Dry Mix Page Page PCM96 Surround Specifications 44.1 kHz 48 kHz 88.2 kHz 96 kHzStorage Media 44.1K → 96KFCC Midi Implementation Chart
Related manuals
Manual 68 pages 35.29 Kb

PCM96 specifications

The Lexicon PCM96 is a high-end digital effects processor renowned for its versatility, high-quality sound, and advanced signal processing capabilities. Tailored for both professional studio environments and live sound applications, the PCM96 delivers an impressive range of features that appeal to audio engineers, musicians, and producers alike.

At the core of the PCM96 lies Lexicon’s proprietary algorithm technology, which has been honed over decades of developing industry-leading reverb and effects processors. With its dual-engine architecture, the PCM96 allows users to access a wide variety of effects simultaneously. This dual-engine approach means that the processor can handle complex audio signals with unmatched clarity and precision.

One of the standout features of the PCM96 is its extensive library of reverb algorithms. From lush concert hall environments to tight and intimate spaces, the PCM96 captures the nuances of acoustic realism. Additionally, it provides advanced options for customizing reverb tails, predelay, and diffusion, allowing users to create unique soundscapes tailored to their specific needs.

Beyond reverb, the PCM96 boasts a rich selection of modulation effects, including chorus, flanging, and delay. These effects can be combined with the reverb algorithms for intricate sound design possibilities. The processor supports up to 96 kHz sample rates, ensuring high fidelity and compatibility with professional digital audio workstations (DAWs).

Another key characteristic of the PCM96 is its intuitive user interface. The front panel features a bright LCD display and straightforward controls, making it easy for users to navigate through presets and tweak parameters on the fly. Additionally, the PCM96 can be integrated seamlessly into various digital audio environments via its comprehensive connectivity options, including AES/EBU, S/PDIF, and MIDI.

The PCM96 also supports remote control and automation via MIDI, enabling users to synchronize effects with musical performances or recording sessions. This feature is particularly beneficial for live sound applications where quick adjustments can significantly impact the performance dynamics.

In summary, the Lexicon PCM96 stands out as a premier effects processor that brings together high-quality sound, innovative technologies, and user-friendly design. Its robust set of features, combined with the legendary Lexicon sound, makes it an indispensable tool for audio professionals seeking to elevate their creative possibilities in sound design and music production.
Top Page Image Contents