Poulan XT 300 instruction manual Operator Safety, Unit / Maintenance Safety, Fuel Safety

Page 2

WARNING: When using gardening appliances, basic safety precautions must al- ways be followed to reduce the risk of fire and serious injury. Read and follow all instruc- tions.

This power unit can be dangerous! Operator is responsible for following instructions and warn- ings on unit and in manual. Read entire instruc- tion manual before using unit! Be thoroughly fa- miliar with the controls and the proper use of the unit. Restrict the use of this unit to persons who have read, understand, and will follow the instructions and warnings on the unit and in the manual. Never allow children to operate this unit.

INSTRUCTION

SAFETY INFORMATION

MANUAL

ON THE UNIT

DANGER: Never use blades or flailing devices. This unit is designed for line trimmer use only. Use of any other accessories or at- tachments will increase the risk of injury.

WARNING: Trimmer line throws ob- jects violently. You and others can be blinded/in- jured. Wear eye and leg protection. Keep body parts clear of rotating line.

Eye Protection

 

 

 

 

 

Hazard Zone

 

 

50 ft.

 

 

Boots

(15 m)

 

Keep children, bystanders, and animals 50 feet (15 meters) away. If approached stop unit im- mediately.

If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, contact your authorized service dealer or call 1-800-554--6723.

OPERATOR SAFETY

SDress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance, on your unit (safety glasses are available). Eye protection should

be marked Z87.

SAlways wear face or dust mask if operation is dusty.

2

SAlways wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards

is recommended.

SAlways wear foot protection. Do not go bare- foot or wear sandals. Stay clear of spinning

line.

SSecure hair above shoulder length. Secure or remove loose clothing or clothing with loosely hanging ties, straps, tassels, etc. They can

be caught in moving parts.

S Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning line.

SStay Alert. Do not operate this unit when you are tired, ill, upset or under the influence of al- cohol, drugs, or medication. Watch what you are doing; use common sense.

SWear hearing protection.

S Never start or run inside a closed room or building. Breathing exhaust fumes can kill.

SKeep handles free of oil and fuel.

UNIT / MAINTENANCE SAFETY

SDisconnect the spark plug before performing

maintenance except carburetor adjustments.

SLook for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep in good working condition.

SReplace trimmer head parts that are chipped, cracked, broken, or damaged in any other

way before using the unit.

SMaintain unit according to recommended pro-

cedures. Keep cutting line at proper length.

SUse only 0.080! (2 mm) diameter Weed Eat- erbrand line. Never use wire, rope, string, etc.

S Install required shield properly before using the unit. Use only specified trimmer head; make sure it is properly installed and securely fastened.

S Make sure unit is assembled correctly as shown in this manual.

SMake carburetor adjustments with lower end supported to prevent line from contacting any object.

S Keep others away when making carburetor adjustments.

S Use only recommended Weed Eaterac- cessories and replacement parts.

S Have all maintenance and service not ex- plained in this manual performed by an autho- rized service dealer.

FUEL SAFETY

SMix and pour fuel outdoors.

SKeep away from sparks or flames. S Use a container approved for fuel.

S Do not smoke or allow smoking near fuel or the unit.

S Avoid spilling fuel or oil. Wipe up all fuel spills. S Move at least 10 feet (3 meters) away from

fueling site before starting engine.

S Stop engine and allow to cool before remov- ing fuel cap.

S Always store gasoline in a container ap- proved for flammable liquids.

Image 2
Contents Manual de Instrucciones Manuel d’Instructions Fuel Safety Operator SafetyUnit / Maintenance Safety Transporting and Storage Cutting SafetyAdjusting the Handle Attaching ShieldKnow Your Trimmer ON/OFF Switch ChokeHOW to Stop Your Unit Primer BulbStarting a Flooded Engine HOW to Start Your UnitStarting a Warm Engine Operating PositionTrimmer Line Advance Cutting MethodsLine Replacement Inspect and Clean UnitClean AIR Filter Check for Loose Fasteners and PartsSeasonal Storage Carburetor AdjustmentEngine Fuel System OtherTroubleshooting Table Cause Remedy Agency and POULAN/WEED EATER, Divi

XT 300 specifications

The Poulan XT 300 is a powerful chainsaw designed for both professionals and avid homeowners. It combines rugged durability with advanced technology, making it suitable for a variety of cutting tasks, from felling trees to pruning branches. With its robust construction, the XT 300 exemplifies reliability and efficiency, ensuring that users can tackle even the most demanding jobs with ease.

One of the main features of the Poulan XT 300 is its powerful engine. Equipped with a 50cc two-stroke engine, it delivers impressive cutting performance, allowing users to handle larger logs and tough materials effortlessly. The engine is designed for optimal fuel efficiency, reducing the frequency of refueling during extensive cutting sessions. This is particularly beneficial for those who engage in prolonged work and want to minimize downtime.

The XT 300 also incorporates innovative technologies that enhance its performance. One such technology is the Easy Start system, which allows for quick and hassle-free starting. This feature reduces the effort needed to start the chainsaw, making it accessible to users of all skill levels. Furthermore, the chainsaw is equipped with an automatic oiling system that ensures the chain remains lubricated during operation, extending the life of both the chain and the bar.

Safety is another important characteristic of the Poulan XT 300. It features a chain brake that automatically activates in case of kickback, providing an extra layer of protection for the user. Additionally, the chainsaw is designed with a comfortable grip and a lightweight frame, which reduces fatigue during extended use and improves overall handling.

The XT 300 also boasts a removable air filter that simplifies maintenance. This feature not only extends the life of the engine but also enhances performance by ensuring that optimal airflow is maintained. Overall, the Poulan XT 300 chainsaw is a blend of power, technology, and comfort, making it a reliable choice for anyone in need of a high-quality cutting tool. Whether you are managing a landscape or tackling a large tree removal project, the XT 300 is designed to meet your needs with efficiency and precision.