Poulan TE 400 CXL Troubleshooting Table Cause Remedy, Repair or replace, Engine will not

Page 6

TROUBLESHOOTING TABLE

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE

CAUSE

REMEDY

Engine will not

S

Engine flooded.

S

See “Starting.”

start.

S

Fuel tank empty.

S

Fill tank with correct fuel mixture.

 

S

Spark plug not firing.

S

Install new spark plug.

 

S

Fuel not reaching carburetor.

S

Check for dirty fuel filter; replace.

 

 

 

 

Check for kinked or split fuel line;

 

 

Carburetor requires adjustment.

 

repair or replace.

 

S

S

See “Carburetor Adjustments.”

Engine will not

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

idle properly.

S

Throttle trigger screw too

S

Loosen screw.

 

 

tight.

 

 

Engine will not

S

Air filter dirty.

S

Clean or replace air filter.

accelerate,

S

Spark plug fouled.

S

Clean or replace spark plug; re-gap.

lacks power,

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

or dies under

 

 

 

 

a load.

 

 

 

 

Engine

S

Fuel mixture incorrect.

S

Empty fuel tank and refill with

smokes

 

 

 

correct fuel mixture.

excessively.

S

Air filter dirty.

S

Clean or replace air filter.

 

S

Carburetor requires adjustment.

S

See “Carburetor Adjustments.”

Line does not

S

Line improperly routed in head.

S

Check line routing.

advance or

S

Line improperly routed through

S

See “Replacing the line.”

breaks while

 

line guide.

 

 

cutting.

S

Line size incorrect.

S

Use only 0.080” (2 mm) dia. line.

Line welds

S

Line size incorrect.

S

Use only 0.080” (2 mm) dia. line.

onto spool.

S

Incorrect spool.

S

Replace with correct spool.

 

S

Line is being crowded against

S

Cut with tip of line fully extended.

 

 

material being cut.

 

 

Line pulls

S

Too little line outside of head.

S

Remove spool and pull 4 -- 6 inches

back into

 

Line size incorrect.

 

(10 -- 15 cm) of line outside of head.

head.

S

S

Use only 0.080” (2 mm) dia. line.

ELECTROLUX HOME PRODUCTS NORTH AMERICA, Division of WCI Outdoor Prod- ucts, Inc. warrants to the original purchaser that

each new Weed Eater brand gasoline tool or at- tachment is free from defects in material and workmanship and agrees to repair or replace under this warranty any defective gasoline prod- uct or attachment as follows from the original date of purchase.

2 YEARS- Parts and Labor, when used for household purposes.

90 DAYS - Parts and Labor, when used for commercial, professional, or income producing purposes.

30 DAYS - Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by improper handling, improper maintenance, or the use of accessories and/or attachments not specifically recommended by ELECTROLUX HOME PRODUCTS NORTH AMERICA for this tool. Additionally, this warranty does not cover tune- ups, spark plugs, filters, starter ropes, starter springs, cutting line, or rotating head parts that

will wear and require replacement with reason- able use during the warranty period. This war- ranty does not cover predelivery setup or nor- mal adjustments explained in the operator’s manual.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

NO CLAIMS FOR CONSEQUENTIAL OR OTHER DAMAGES WILL BE ALLOWED, AND THERE ARE NO OTHER EXPRESS WARRANTIES EXCEPT THOSE EX- PRESSLY STIPULATED HEREIN.

SOME STATES DO NOT ALLOW LIMITA- TIONS ON HOW LONG AN IMPLIED WAR- RANTY LASTS OR THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU.

ELECTROLUX HOME PRODUCTS NORTH AMERICA’S policy is to continuously improve its products. Therefore, ELECTROLUX HOME PRODUCTS NORTH AMERICA reserves the right to change, modify, or discontinue models, designs, specifications, and accessories of all products at any time without notice or obligation to any purchaser.

6

Image 6
Contents TWIST-N-EDGE t TE 400 CXL Fuel Safety Operator SafetyUnit / Maintenance Safety Safety Glasses or similar eye protectionAttaching the Handle Cutting SafetyTransporting and Storage Attaching the ShieldOperating Position HOW to Stop Your UnitHOW to Start Your Unit Trimmer Line AdvanceRefilling the Spool with Line Installing Spool with LineCarburetor Adjustments Ignition TimingRepair or replace Troubleshooting Table Cause RemedySee Carburetor Adjustments Engine will notYour Warranty Rights and OB

TE 400 CXL specifications

The Poulan TE 400 CXL is a robust electric chainsaw engineered for both homeowners and professionals seeking power, efficiency, and reliability. As part of the esteemed Poulan brand, this chainsaw is designed to handle various cutting tasks, from trimming branches to felling moderate-sized trees.

One of the standout features of the TE 400 CXL is its powerful 40-volt lithium-ion battery, providing ample runtime and charging convenience. The battery technology enables users to enjoy the freedom of cord-free operation while delivering performance comparable to gas-powered models. With an efficient power management system, this chainsaw maximizes battery life, allowing users to complete extensive cutting jobs without frequent interruptions.

The TE 400 CXL boasts a 16-inch cutting bar, striking an ideal balance between maneuverability and cutting capacity. This length is suitable for trimming smaller limbs and larger branches, providing versatility for various gardening and landscaping tasks. The automatic oiler is another significant feature of the chainsaw, ensuring that the cutting chain remains lubricated for smoother operation and reduced wear. This system minimizes the risk of overheating, prolonging the lifespan of the equipment while enhancing overall cutting performance.

With a weight of just over 10 pounds, the Poulan TE 400 CXL is designed for ease of use, minimizing fatigue during extended periods of operation. The ergonomic handle, coupled with an intuitive design, provides comfortable handling, making it suitable for users of all skill levels. Safety features, such as a brake system and a chain catch, further enhance user protection, ensuring that accidents are minimized during operation.

The chainsaw features a manageable chain tensioning system that allows for quick adjustments without the need for additional tools. This user-friendly design reflects Poulan's commitment to convenience and efficiency, making regular maintenance easier for the average user.

In terms of performance, the TE 400 CXL delivers consistent cutting speed with its high-performance motor, allowing users to tackle various materials with ease. Additionally, its eco-friendly operation produces lower emissions, aligning with a growing demand for environmentally-conscious tools.

In conclusion, the Poulan TE 400 CXL is a powerful, versatile, and user-friendly electric chainsaw suitable for various cutting tasks. With its advanced features, ergonomic design, and efficient battery technology, it stands as a reliable choice for anyone in need of an effective and simple cutting solution.