Poulan 545186798, PPB330 HOW to Stop Your Unit, HOW to Start Your Unit, Starting a Warm Engine

Page 11

moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

HOW TO STOP YOUR UNIT

SRelease the throttle trigger.

S Push and release the engine ON/STOP switch. The switch will automatically return to the ON position. Wait 5 seconds before at- tempting to restart unit to allow switch to reset.

ON/STOP switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

Starting position

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

Primer bulb

Choke lever

Muffler

 

Starter handle

4.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

5.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

6.Pull starter rope sharply until engine runs, but no more than 6 pulls. NOTE: If the en- gine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Pull the starter rope 2 more times. Move the

choke lever to the HALF CHOKE position and pull the starter rope until the engine runs, but no more than 6 pulls. If the en- gine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

7.Once the engine starts, allow it to run 10 seconds. Squeeze throttle trigger and allow the unit to run for 30 more seconds at RUN. Release throttle trigger. NOTE: If engine dies with the choke lever in the RUN posi- tion, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Pull starter rope sharply until engine runs, but no more than 6 pulls.

3.Allow engine to run 15 seconds, then move the choke lever to RUN.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . . PPB1000E Cultivator . . . . . . . . . . . . . . . . . . . PPB2000T Blower . . . . . . . . . . . . . . . . . . . . . PPB3000B Brushcutter . . . . . . . . . . . . . . . . . PPB4000C Pruner . . . . . . . . . . . . . . . . . . . . . PPB5000P Pruner . . . . . . . . . . . . . . . . . . . . . PPB5500P

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL AT- TACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

Upper shaft

Coupler

LOOSEN

Attachment

TIGHTEN Knob

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Table of ContentsIdentification of Safety Symbols Optional Attachments Safety RulesOperator Safety Transporting and Storage Unit / Maintenance SafetyFuel Safety Line Trimmer SafetyRunning or when cutting blade is moving Edger SafetyBLOWER/VACUUM Safety Brushcutter SafetyAway from the operator Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetyEssary before restarting unit Snow Thrower SafetyKnow how to stop quickly HeadAttaching Shield AssemblyInstalling Trimmer ATTACH- Ment Adjusting the Assist HandleOperation Starting a Flooded Engine HOW to Stop Your UnitHOW to Start Your Unit Starting a Warm EngineCutting Methods Installing Optional ATTACH- MentsOperating Position Trimmer Line AdvanceCheck for Damaged or Worn Parts MaintenanceCheck for Loose Fasteners and Parts Service and Adjustments Page Fuel System Carburetor Idle Speed AdjustmentReplacing the Trimmer Head Seasonal StorageTrouble Cause Remedy Troubleshooting TableEngine OtherLigations The U.S. Environmental Limited WarrantyCanada, contact Intermediate 125 hours Extended 300 hours

545186798, PPB330 specifications

The Poulan PPB330,545186798 is a powerful and versatile addition to any homeowner's landscaping arsenal. This string trimmer is designed to make yard maintenance tasks easier and more efficient, catering to both novice users and seasoned gardeners alike.

One of the standout features of the PPB330 is its robust 33cc 2-cycle engine. This powerful engine delivers sufficient power to tackle thick weeds and tough grass with ease. The trimmer is built to handle a variety of tasks, from edging along sidewalks to trimming around flower beds, ensuring that your yard remains impeccably manicured.

Another notable characteristic of the Poulan PPB330 is its lightweight design. Weighing in at just over 10 pounds, this trimmer is easy to maneuver and reduces user fatigue during extended periods of use. The ergonomic handle design enhances comfort and control, allowing for precise cutting and trimming without straining the body.

The PPB330 is equipped with a dual-line feed system, which allows for quick and easy line replacement. This feature ensures that users can continue working without extensive downtime. Additionally, the trimmer has a 17-inch cutting width, making it efficient for tackling larger areas in less time. This combination of power and efficiency makes the PPB330 an ideal choice for homeowners with sizable lawns.

The Poulan PPB330 also incorporates technology designed to reduce emissions and improve fuel efficiency. With its environmentally friendly design, users can feel good about their choice in landscaping equipment. The low-vibration technology helps minimize user fatigue, providing a smoother operation and an enjoyable trimming experience.

Ease of use is a hallmark of the Poulan PPB330, featuring a spring-assist starting system for quick ignition. This means that even those who may not be familiar with operating a string trimmer will find it user-friendly.

In summary, the Poulan PPB330,545186798 stands out as a reliable and efficient string trimmer. Its powerful engine, lightweight design, dual-line feed system, and environmentally friendly technologies make it an excellent choice for anyone looking to maintain a beautiful yard effortlessly. Whether you are edging, trimming, or tackling overgrown areas, the PPB330 is built to deliver superior performance and convenience.
Top Page Image Contents