Assembly/disassembly | Electrolux 95390052100, 52 BP PRO, 4630X BP

Never store the engine with fuel in the tank in a poorly ventilated place where the fumes produced by the gasoline could propagate and

reach a fire, candle, burner or furnace pilot light, water heater, dryer, etc. Never store excessive quantities of fuel.

E. Assembly/disassembly

E1. Setting the motor on the frame

Position the motor so that the fuel cap faces upward and the bracket for fastening it to the frame is on one side. Screw pin A onto the motor as shown in the figure and tighten it securely. Fasten the motor to the frame and tighten it securely with the nut provided (B).

E2. Insertion of padding on frame

Pick up the frame+motor assembly and place them on the base; insert the upper part of the padding on the frame and fasten it with the two straps as shown in the figure. Take the support for the starter knob and fit it as shown in the figure. Fasten the starter cord to the support as shown in figure.

E3. Assembly of the transmission shaft to the flexible shaft

4 9

Pull the plastic ring nut away from the end of the rigid tube turning it counterclockwise if necessary. Insert the rigid tube into the handle section until the label is aligned with the edge of the plastic threaded rim Tighten the ring nut hand tight.

Safety pole guard

2 3 4

The safety pole guard should be mounted using the accessories supplied and in the configuration shown in the figure,in contact with the delta handle.

E4. Delta grip

For your safety, fasten the delta handle in front of the label placed on the shaft at a distance of at least 11 cm from the rear grip. The handle should be fastened in a comfortable working position. If you are using sawtooth blades, the grip distance should be moved by at least 36 cm.

E5. Fitting guard on line cutter head and grass cutting blade

2 3 4

Fit the safety guard (A) against the gearbox (I) position the lower clamp (G) in the housing under the shield and the upper clamp (F) over the shaft. Insert and tighten the screws (H).

6 - ENGLISH

Safety guard extension (exclusively for use with nylon string head)

2 3 4

The string cutting blade housed in the plastic shield will cut the nylon string to optimum length; a string that is too long reduces the rotation speed of the engine and interferes with cutting efficiency, as well as increasing the risk of injury.

The extension (B) should be installed only for use with the nylon string head, with the aid of the string cutter blade (L), that regulates the length of the string and thus the cutting diameter. For correct assembly see the illustration on the cover and perform the following sequence of steps: Insert the extension (B) on the safety guard (A) at the reference notches (C), and fasten with the screws (D), then apply the string cutter blade (L) with the cutting edge facing towards the outside of the shield, and fasten it with the screw (E) (Make sure the screws are tightened all the way (E) and are not loosened by the vibrations. If necessary, tighten them again).

E6. Assembly/disassembly of line cutter head

2 3 4 10

Apply the nylon string head as shown in the illustration: a) Protection flange b) Upper plate c) Nylon string head. Tighten by turning counterclockwise. As you tighten, hold the nylon string head and plate still and insert the wrench or screwdriver supplied in the holes in the plate and gearbox; first turn the plate until the two holes match.

E7. Assembly/disassembly of grass cutter blade

2 3 4 10

Do not use the nylon string head guard extension (H) with metal blades.

Assemble blade as illustrated: a) Flange guard -

b)Upper cap with blade centering - c) Blade with text and directional arrow facing upwards - d) Lower washer - e) Fixed mower gauge - f) Blade locking screw (length mm 16).

If you want to assemble the rotating mower gauge,proceed as illustrated: a) Flange guard -

b)Upper cap with blade centering - c) Blade with text and directional arrow facing upwards - d)

95390039400, 4230X BP, 95390052100, 4630X BP, 95390039300 specifications

Electrolux offers a wide range of high-performance kitchen appliances, and among them are the Electrolux 52 BP PRO, 4630X BP, 95390039300, 4230X BP, and 95390039400 models. Each of these products is designed to meet the demands of both home cooks and professional chefs, combining innovative technologies with user-friendly features.

The Electrolux 52 BP PRO is a standout model, featuring advanced cooking technology that provides exceptional performance and flexibility. Its powerful burner system ensures rapid heating and precise temperature control, allowing users to sauté, sear, and simmer with ease. The design also includes a spacious oven with advanced cooking modes, such as convection baking, which promotes even heat distribution for perfectly baked goods.

Next, the Electrolux 4630X BP model caters to a modern aesthetic while integrating cutting-edge functionality. With a sleek stainless-steel finish, it not only looks great but is also easy to clean and maintain. Equipped with an intuitive touchscreen interface, this model makes cooking more accessible for everyone, providing recipe suggestions and guided cooking features that enhance the culinary experience.

The 95390039300 model stands out for its energy efficiency, which is an essential consideration for environmentally-conscious consumers. It incorporates smart technology that optimizes energy use without compromising performance, ultimately leading to cost savings on utility bills. Additionally, the appliance promotes a safe cooking environment through features like automatic shut-off and child locks.

With the 4230X BP model, users can expect a combination of style, durability, and efficiency. This model is designed with a rapid preheating feature, which saves time and enhances productivity in the kitchen. Moreover, its self-cleaning function relieves the burden of maintaining the oven's cleanliness, allowing users to focus on their culinary creations.

Finally, the 95390039400 offers unique cooking modes that cater to diverse culinary styles, from traditional baking to modern steam cooking. This versatility allows users to experiment with various dishes while ensuring consistent results. The model also emphasizes user comfort, with ergonomic controls that make cooking an enjoyable experience.

Overall, Electrolux's range of appliances—including the 52 BP PRO, 4630X BP, 95390039300, 4230X BP, and 95390039400—reflects their commitment to innovation, reliability, and exceptional design. With these appliances, both amateur and professional cooks can elevate their culinary skills and enjoy the cooking process.