Caring for your Trimmer
9
•WARNING
Disconnect from the mains electricity supply, before attempting any maintenance or adjustment. Cutting head continues to rotate after the trimmer has been switched off.
After you have finished using your Flymo Trimmer follow the procedure below:
1.Disconnect from the mains electricity supply.
2.Never clean your trimmer with water, cleaning fluids, or solvents, just remove debris with a suitable tool, a soft brush or dry cloth.
3.Using the scraper provided, clean around the inside of the cutting head housing to remove any grass and debris. (Fig L)
4.Using a soft brush, clean around the inside of the cutting head housing (Fig M), the cutting head (Fig N) and the motor housing air vents.(Fig P)
5.Inspect the trimmer carefully, especially the parts of the cutting head.
6.If your trimmer is damaged in any way contact your local Flymo/Partner approved service centre.
•Never use a damaged trimmer.
7.Wind cable carefully to avoid kinking.
8.Store in a cool, dry place and out of reach of children.
L |
M |
N |
P |
MAINTENANCE