Gardena 480, 550, 640 manual Setting the Working Position

Page 4

GB

If you stop working

Never leave the Hedge Trimmer unattended in the working

 

place. If you stop work, store the Hedge Trimmer in a safe place.

 

Disconnect the mains plug!

 

Should you stop work in order to get to another working place,

 

always switch off the Hedge Trimmer to go there. Disconnect

 

the mains plug!

 

Always attach the blade protection for transport and storage of

 

the unit.

Familiarise yourself

Make yourself familiar with the surroundings and look out for

with the surroundings

dangers which you may not detect due to machinery noise.

Never use in rain

Never use the unit when it rains or in damp/wet areas.

or damp/wet areas

Do not operate the Hedge Trimmer near swimming pools and

 

garden ponds.

Electrical safety –

Check the power cable regularly for damage and signs of wear

check for damage

and tear. The power cable must only be exchanged by an

 

authorised electrician. Please contact your GARDENA Service

 

Centre.

Mains cable

The Hedge Trimmer must only be operated with an undamaged

 

electrical cable. If the mains- or extension cable is damaged,

 

disconnect the mains plug immediately.

Waterproof extension

The socket of an extension cable should be waterproof.

cable socket

 

Extension cable

Only use permitted extension cables. Ask your electrician.

Using portable units

For portable units which are used outdoors, we recommend

outdoors

to use a residual-current device having a residual-current rating

 

30 mA.

For Switzerland

In Switzerland use of a residual-current device is obligatory.

Never carry the Hedge

Never carry the Hedge Trimmer by its cable. Never use the

Trimmer by its cable

cable to pull the connector plug out of the mains socket.

 

Protect the cable from heat, oil and sharp edges.

 

 

Setting the Working Position

 

.To set the working position you must first unplug the mains

 

plug from the socket! Danger of injury!

 

.Leave the blade cover on the blade.

Note

The handle can be adjusted to 11 different working positions

 

(in 12° steps, total range 120°).

12

.Press and hold down the black studded button until you have moved the swivel handle up or down to a position which is comfortable for you.

.Release the button and ensure the handle locks into place.

Image 4
Contents Gardena Summary of Operating Instructions for Your Hedge Trimmer Where to Use Your Hedge TrimmerAttaching the Guide Handle For Your Safety Setting the Working Position Two-hand safety switch Starting the Hedge Trimmer Stopping Initial OperationSwivel Handle down Handle up For cutting High hedges Cable lock / Extension CableCleaning the blades Storage Damage Disposal Safety ClutchIf the blades are jammed by an object Technical Data Safety Instructions on the CasingInformation Complaints/repairsWarranty EHT 410 vario Bulgaria