Ford 2007 manual 150,000 miles, Inspect PCV for flow 3V engines

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS

150,000 miles

❑Change engine oil and replace oil filter.

❑Inspect tires for wear and rotate.

❑Inspect brake pads/shoes/rotors/drums, brake lines & hoses, and parking brake system.

❑Inspect wheel ends for endplay and noise.

❑Inspect engine cooling system and hoses.

❑Change Motorcraft Premium Gold Engine Coolant (see exceptions page 46 and record page 48).

❑Inspect exhaust system and heat shields.

❑Inspect steering linkage, ball joints, suspension and, if equipped, half shafts, driveshaft and U-joints.

❑Replace engine air filter.

❑Replace fuel filter (see page 47).

❑Replace cabin air filter, if equipped.

❑Change automatic transmission/transaxle fluid and filter (filter not required on CD4E).

❑Change rear axle lubricant on all rear wheel drive (RWD) vehicles (see pages 42 and 46).

❑Replace accessory drive belt(s) (if not replaced within last 100,000 miles).

❑Replace climate-controlled seat filters if equipped (Navigator and Expedition).

❑Inspect PCV for flow (3V engines).

❑Lubricate ball joints and steering linkage if equipped with zerk fittings.

❑Replace 4X2 wheel bearings and grease seals, lubricate and adjust bearings.

❑Inspect and lubricate 4X4 front axle shaft U-joints (F250/350/450/550).

❑Change front axle lubricant (4X4 only).

❑Change transfer case fluid (4X4 only).

❑Multi-point inspection (recommended)

DEALER VALIDATION:

RO#: P&A CODE:

DATE:MILEAGE:

28Scheduled Maintenance

Normal Schedule Trucks, Fullsize Vans & SUVs