Flymo CT250 manual Assembly Instructions cont’, Fitting the Wall Bracket and Charging the Battery

Page 4

3

 

 

 

 

 

 

 

Assembly Instructions cont’

 

 

B

C

Fitting the Handle (D & E)

 

 

1.

Insert the nut into the handle knob. (if applicable)

 

 

 

2. Attach steady handle to product using bolt and han-

 

 

 

 

dle knob as shown in Fig

D.

 

 

 

3. Adjust the steady handle to a comfortable operating

 

 

 

 

position, see Fig E., by unscrewing the handle knob,

 

 

 

 

springing the side lugs apart, moving the handle to

 

 

 

 

the required position, carefully re-engaging the teeth

 

 

 

 

and then tightening the handle knob.

 

 

 

 

Fitting the Shoulder Harness (F)

 

 

 

1.

Thread the strap through the slot in the battery housing

(F1).

D

E

2. Thread strap through the buckle. Adjust as required to ensure

 

 

the shoulder harness is in the most comfortable position.

 

nut (if

 

F

 

 

applicable)

 

 

 

 

 

 

1

 

 

handle knob

bolt

 

 

 

 

Fitting the Wall Bracket and Charging the Battery

G

1

2

•IMPORTANT !

Switch charger off at the wall socket before connecting or disconnecting the trimmer to the wall bracket.

1. It is recommended that the wall bracket

(G2) should be

mounted on a smooth, vertical and internal wall which is

 

strong enough to hold the weight of the product, in a well

 

ventilated area between 5°C and 25°C.

 

2. There are 3 holes on the wall bracket. Position the wall

 

bracket with the two holes at the top.

See Fig H.

3. Ensure that when the trimmer is attached the bottom of

 

the trimmer is within 4 inches (100 mm) of the ground, this will make it easier to hang the trimmer and will also ensure that the wall bracket is within easy reach of an electric socket to allow the charger to be plugged in.

4.Fix wall bracket securely to the wall with the plugs and screws provided.

5.Your cordless trimmer can now be attached to the wall

bracket for charging.

Initial Charging Procedure

1.Use the charger indoors only.

2.Ensure the charger is not exposed to moisture. Keep the charger and the trimmer dry at all times. Keep the charger well ventilated during charging.

3.Ensure the trimmer is correctly located into the wall

bracket

(G2) and the charge connector

(H1).

4. Plug the charger

(G1) into a suitable household electrical

wall socket and switch on.

 

 

5.The red indicator lamp glows continuously during charging.

6.Full charge will be achieved in 24 hours. During

charging the charger becomes warm. This is normal and means the charger is operating correctly.

Re-Charging Your Cordless Trimmer

H

1

•The battery should be charged for 24 hours before use.

•Re-charge your cordless trimmer immediately after every use for the full 24 hour charging period.

•The cordless trimmer can be left connected to the charger permanently, with the charger switched on, without fear of overcharging.

1.Re-charge the battery as soon as the cutting power of your cordless trimmer begins to die and slow down.

2.Avoid running the cordless trimmer into "deep" dis- charge, i.e. avoid flattening the battery completely.

3. Follow the procedure outlined in the

Initial Charging

Procedure.

 

4.Charging the battery according to these instructions should ensure maximum battery life.

•The charger will automatically keep the battery topped up with charge during storage and will ensure that the cordless trimmer is ready for use.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Information Carton Contents SafetyBattery Assembly InstructionsDispose of Your OLD Batteries Safely Do not CUT OPEN, Burn or IncinerateAssembly Instructions cont’ Fitting the Wall Bracket and Charging the BatteryInitial Charging Procedure Nut if Applicable Handle knob BoltAdjustment How to trim and edgeAuto Line Feed System Before USEFault Finding Chart Manual line feedSpool cap and nylon line Manual line Feed buttonSpool cap and nylon line cont’ Caring for your Cordless TrimmerEnvironmental Information Eyelet LineService Recommendations Guarantee & Guarantee PolicyEC Declaration of Conformity Newton Aycliffe Bowden

CT250 specifications

The Flymo CT250 is an innovative and cutting-edge lawn mower designed to simplify garden maintenance while ensuring a perfectly manicured lawn. With its lightweight and compact design, the CT250 is ideal for small to medium-sized gardens, granting users ease of maneuverability without compromising performance.

One of the standout features of the Flymo CT250 is its powerful 250W electric motor, which delivers efficient cutting power and allows for a clean and precise mowing experience. The mower is equipped with a 25cm cutting width, making it suitable for navigating through narrow paths and tight spots with ease. This feature is particularly beneficial for gardens with various landscape elements such as flower beds and trees.

The adjustable cutting height settings of the CT250 are another significant advantage. Users can choose from three different height levels ranging from 2 to 5 centimeters. This versatility allows gardeners to customize their mowing experience based on the type of grass and the desired lawn finish, ensuring that every lawn can meet their personal aesthetic and health requirements.

Flymo’s patented Glide Technology is integrated into the CT250, enhancing maneuverability across the lawn. This technology affects the mower's design, facilitating a hover-like effect that allows it to glide over the grass. This not only makes mowing easier but also reduces the strain on the user, as it requires minimal effort to navigate around obstacles.

Another noteworthy characteristic of the Flymo CT250 is its integrated grass collection box, which holds up to 30 liters of grass clippings. This collection box helps keep the lawn neat and tidy by minimizing the need for post-mow cleanup, making the entire gardening process more efficient.

The CT250 also features a safety switch, which ensures that the mower can only be activated if both hands are on the controls. This safety aspect highlights Flymo's commitment to user protection while operating their equipment.

In conclusion, the Flymo CT250 combines power, maneuverability, and user-friendly features, making it an excellent choice for those looking to maintain a pristine lawn with minimal hassle. Whether for occasional touch-ups or regular mowing, this mower stands out as an effective tool for any home gardener. Its combination of innovative technology and thoughtful design makes it a valuable investment for outdoor enthusiasts.
Top Page Image Contents