Flymo Mini Trim manual Manual Line Feed System, If Fault Persists

Page 5

4

 

 

 

 

Manual Line Feed System

To feed the nylon line

H

 

 

1.Press and hold the two latches (H).

2.Gently pull the line until it reaches the line cutter.

3.Release the two latches. Check that the spool is locked in position.

4.If too much line has been fed out, press the two latches and turn the spool anti-clockwise until the line is at the desired length.

To remove spool

1. Press and hold the two latches.

2. Pull spool out of spoolholder (J).

When refitting the spool

1.Keep all areas of the spool and spoolholder clean. Failure to do so may prevent the spool from being

securely located in the spoolholder.

Line cutter

2.

Make sure the line is placed through the slot in the

 

 

 

spoolholder (K).

 

 

3.

Place spool into spoolholder and press down into

 

 

 

place.

J

 

4.

Check that the spool is correctly fitted by trying

 

 

to remove the spool without depressing the

Cleat

Spool

 

latches (K1).

 

 

 

To replace nylon line

 

 

Replacement line is available from most Electrolux

 

 

Outdoor Products stockists. You can buy it either as

Latches

 

spool and line complete or as nylon line only.

 

To replace spool and line complete

 

Spoolholder

 

 

1.

Remove old spool.

 

 

2.

Release line from cleat. Unwind approximately

 

 

 

100mm of line and feed through slot in spoolholder

 

 

 

(K).

 

Slot

3.

Re-fit spool into spoolholder. Check that the spool is

 

 

 

 

locked in position.

 

 

To replace nylon line on spool

K

 

1.

Take approximately 5 metres of line line and insert

 

 

 

 

into one of the line lock holes in the spool (L).

 

 

2.

Wind line onto spool in the direction of the arrows on

 

 

 

the top of the spool. Care should be taken to ensure

 

 

 

that the line is neatly coiled on the spool (L).

 

 

3.

Leave approximately 100mm of line unwound and

 

 

 

feed through slot in spoolholder (K).

 

 

4.

Replace spool into spoolholder.

 

 

Ensure spool is correctly fitted.

 

K1

Remember! Your Flymo trimmer is designed to use

 

only nylon line with a maximum diameter of 1.5mm.

 

 

Use only genuine Flymo nylon line.

 

 

Fault Finding Hints

 

 

WARNING! Disconnect from the mains electricity

 

 

supply before attempting any maintenance or

 

 

adjustment.

 

 

1.

Line too short.

 

 

 

Feed out line.

L

 

2.

Line broken inside of spoolholder.

 

 

 

 

Remove spool and re-thread line.

 

 

3.

Line jammed on spool.

 

 

 

Remove spool and rewind line to remove crossed loops.

 

 

4.

Poor performance.

 

 

 

Ensure the inside of the spoolholder is clean and

 

 

 

free from debris.

 

 

5.

Line snaps continuously.

 

 

 

Use only tip of nylon line to trim. If symptoms still

 

 

 

persist, change spool and line.

 

 

6.

Line will not pull out.

 

 

 

Check that line has been released from cleat.

 

 

7.

IF FAULT PERSISTS

 

 

 

Contact Electrolux Outdoor Products Customer

Line lock

 

 

Service. Telephone 01325 300303.

 

 

hole

 

 

 

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Information Safety Carton ContentsCables ConnectorsMains Plug Replacement How to Trim Assembly InstructionsEnsure the Safety Guard is Securely Starting and StoppingManual Line Feed System If Fault PersistsAutomatic Line Feed System Maintenance Fault Finding Chart Automatic Line Feed onlyService Recommendations Environmental InformationEC Declaration of Conformity Guarantee & Guarantee Policy

Mini Trim specifications

The Flymo Mini Trim is a versatile and efficient tool designed for easy maintenance of garden edges, lawns, and flower beds. This lightweight and compact grass trimmer is favored by both novice gardeners and seasoned landscape professionals for its ease of use and remarkable performance.

One of the standout features of the Flymo Mini Trim is its ergonomic design. Weighing in at just a few kilograms, it allows users to maneuver effortlessly around the garden, reducing fatigue during prolonged use. The adjustable shaft ensures that users of varying heights can operate the trimmer comfortably, while the cushioned handle provides added grip and control.

Powered by a robust electric motor, the Flymo Mini Trim offers consistent performance without the hassle of fuel. The electric power source means less environmental impact, making it an eco-friendly choice that contributes to sustainable gardening practices. Additionally, the trimmer comes equipped with a long power cord, allowing for extended reach without the frequent need for re-plugging.

One of the key technological advancements incorporated in the Flymo Mini Trim is its innovative line feed system. This system automatically advances the trimmer line when needed, eliminating the tedious task of manual line feeding. The dual-line cutting feature ensures an efficient cutting performance, enabling users to tackle larger areas quickly.

For added safety, the Flymo Mini Trim is equipped with protective features such as a safety guard that helps to prevent debris from scattering, and a power switch that is easily accessible. These safety measures ensure that gardeners can operate the tool safely while achieving a clean finish on their lawn edges and around flower beds.

Another characteristic that makes the Flymo Mini Trim a standout compared to other grass trimmers is its compact storage capability. The trimmer can be easily disassembled for convenient storage, making it ideal for those with limited space in their garden shed or garage.

In conclusion, the Flymo Mini Trim combines lightweight design, ergonomic comfort, and advanced technology to deliver a top-tier gardening experience. Whether you're maintaining a small garden, tidying up borders, or sculpting flower beds, the Flymo Mini Trim stands out as a reliable tool that efficiently meets the needs of any gardener. With its focus on usability and efficiency, it has earned a reputation as a go-to choice for effective lawn care.
Top Page Image Contents