CARTON CONTENTS
Hedge Trimmer
Assist Handle
Screw
Nut
Examine parts for damage. Do not use damaged parts.
NOTE: If you need assistance or find parts missing or damaged, call
If you receive your unit assembled, check each step to be sure your unit is properly assembled. Follow all safety information in the manual and on unit.
ASSIST HANDLE ATTACHMENT
WARNING: Do not use without the as- sist handle properly installed.
This unit is equipped with an assist handle for extra comfort and control.
SPlace the assist handle on the unit.
Assist Handle
S Insert screw through assist handle and motor housing.
Screw
Nut
SThread nut onto screw. Tighten securely.
Use only the voltage supply specified on your unit. See chart below to select the proper ex- tension cord.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
25 ft. | 50 ft. | 100 ft. |
16 gauge | 16 gauge | 16 gauge |
Extension cords are available for this unit.
Recessed
Cord Plug
Receptacle
Cord Retainer Hook
DOUBLE INSULATION CONSTRUCTION
This unit is Double Insulated to help pro- tect against electric shock. Double insula- tion construction consists of two separate “layers” of electrical insulation instead of grounding.
Tools and appliances built with a double in- sulation system are not intended to be grounded. No grounding means is provided on this unit, nor should a means of ground- ing be added to this unit. As a result, the ex-
tension cord used with your unit can be plugged into any standard 120 volt electri- cal outlet.
Safety precautions must be observed when operating any electrical tool. A double insulation system only provides added protection against injury resulting from internal electrical insulation failure.
WARNING: All electrical repairs to this unit, including housing, switch, motor, etc., must be diagnosed and repaired by quali- fied service personnel. Replacement parts for a double insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words DOUBLE INSULATION or DOUBLE IN- SULATED. The symbol 
(square within a square) may also be marked on the ap- pliance. Failure to have the unit repaired by qualified service personnel can cause the double insulation construction to become ineffective and result in serious injury.
CORRECT OPERATING POSITION
Stand as shown; check for the following:
S Operator wearing safety glasses/eye protection and proper clothing.
SRight hand holding rear handle, left hand holding assist handle.
SUnit below waist level.
4